Unshielded 180 Degree CAT6 Network Keystone Jack With UL / CE Certificated

Unshielded CAT6 Keystone Jack Network Connector UTP Keystone Module Fluke Test

Specifications:

Performence class, for up to 250MHz
UL, CE certificated
Meet TIA/EIA 568A-568B requirements
Angle: 180 Degree

Product Description:

1. Keystone Jack, Cat.6 Class E, UTP type, for connecting application of
communication prots in working area.
2. A compact & ingenious designing, with the punching sequence direction marks on the
punching cover of the keystone jack. That can provides a correct and quick guide
for punching and connecting operation. And the fastener hats will make sure the
cable can be fixed reliably in the IDC clips.
3. According to the standard of ISO/IEC 11801:2002 Class E & ANSI/TIA/EIA 568-B.2-1
CAT.6, T568A punching sequence and T568B punching sequence are both compatible.
4. Connection type: FCC connector for RJ45 patch cord and IDC for 4-pair Cat.6 calbes.
5. Fitting for the Cat.6 general cable distribution system. Compatible for Cat.5 and
Cat.5e systems.

ORDERING INFORMATION:

Electrical:

According to UL 1863
Current rating: 1.5 Amp Max.
Voltage rating: 150 Volts
Contact resistance: 20 m-ohm
Insulation Resistance: 500M-ohm
Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min
Materials:
Housing: PC UL94V-0
IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire.
PCB: FR4 1.6mm(0.04") thickness, 2 layers
Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area