24V Electronic Start 6LTAA8.9-G2 Cummins G Drive Engines For
Generator Set , 220 KW / 1500 RPM
| Technical parameters of diesel generator sets: |
| Generator Set |
| Generator Model | KY200GF |
| Prime Power | 220kw |
| Rated Voltage | 400/230V |
| Frequency | 50Hz |
| Power Factor | 0.8(lagging) |
| Dimension (L×W×H) (mm) | 2600*950*1650 mm |
| Genset weight (kg) | 2100 kg |
| Diesel Engine |
| Brand | Cummins |
| Type | 6LTAA8.9-G2 |
| Number of Cylinders | 6 |
| Rotating Speed | 1500RPM |
| Cycle | Four stroke |
| Cooling Method | Water Cooling |
| Bore×Stroke(mm) | 114*135 |
| Displacement(L) | 8.9 |
| Compression Ratio | 16.6:1 |
| Speed Governor | Electrical |
| Cooling System | Water-cooled |
| Total Lubrication System Capacity (L) | / |
| Fuel Consumption at 100% Load | 59 L/H |
| Starting Method | 24V Electrical starting |
The list of Genset Engine Models
| Mode | Rated Power(kw/rpm) | Brand |
| 4B3.9-G1 | 24/1500 | Cummins |
| 4B3.9-G2 | 24/1500 | Cummins |
| 4BT3.9-G1 | 36/1500 | Cummins |
| 4BT3.9-G2 | 36/1500 | Cummins |
| 4BTA3.9-G2 | 50/1500 | Cummins |
| 4BTA3.9-G2 | 58/1500 | Cummins |
| 4BTA3.9-G11 | 67/1500 | Cummins |
| 6BT5.9-G1 | 86/1500 | Cummins |
| 6BT5.9-G2 | 96/1500 | Cummins |
| 6BTA5.9-G2 | 106/1500 | Cummins |
| 6BTAA5.9-G2 | 120/1500 | Cummins |
| 6BTAA5.9-G12 | 132/1800 | Cummins |
| 6CTA8.3-G1 | 163/1500 | Cummins |
| 6CTA8.3-G2 | 170/1800 | Cummins |
| 6CTAA8.3-G2 | 183/1500 | Cummins |
| 6LTAA8.9-G2 | 220/1500 | Cummins |
| 6ZTAA13-G2 | 390/1800 | Cummins |
| 6ZTAA13-G3 | 340/1800 | Cummins |
| QSZ13-G2 | 500/1500 | Cummins |
A: Test before shippment
- Each Generator Set shall be put into commission more than 4 hours
totally, tested on idle load, fully load and
10% overload.
- Noise level shall be tested.
- All of the meters on the control panel shall be tested.
- The appearance of the Set and the label, nameplate shall be
tested. "
-Voltage available: 50Hz: 380-400-415V/ 220-230-240V; 60Hz:
220-380-416-440-480V/ 110-208-220-
240V. Any special voltage is also available as cilent's request.
B: Packing & Warranty
- Packing: Wooden Case, Plywood or Metal Case.
- Delivery Time: Less than 15 working days after receiving
prepayment.
- Warranty: One year or 1, 000 hours from the date of shippment
(15 Months or 1, 200 hours for Alternator Part).
C: Payment
T/T, 30% deposit, 70% will be payed before delivery
T/T, 30% deposit , 70% L/C at sight
100% L/C at sight
D Assembly Process
