Internal SAS SFF-8087 to 4x SATA Cable, 1.5-meter(1.6ft)
AWG30 Twinaxial 8-pair high-bandwidth low-skew wire
Impedance = 100 Ohms
Up to 6Gbps data rates per channel
This Mini SAS to SATA cable provides reliable internal connectivity
between a Serial attached SCSI controller card in a computer system
and direct attached storage devices with a SATA connector, allowing
you to connect four SATA drives to an SAS controller. This is a
Forward Breakout cable, meaning that it is intended to connect to a
host/controller on the SAS end and to drives on the SATA end.
Features:
100% BRAND NEW.
100% open &short testing.
High -End internal 32-pin SFF-8484 Female Mini-SAS and Internal
36-pin SFF-8087 male Mini-SAS.
Hi-pot:DC 300V 10ms.
Insulation Resistance: 10m OHM Min.
Contact Resistance: 2.0 OHM Max.
Gold plated PCB contacts.
Dual ports allowing redundant paths.
Ability to connect a device to multiple computers.
Full SCSI command set.
Faster interface compared to SATA, up to 30%, no STP (Serial ATA
Tunneling Protocol) overhead.
No need for SATA interposer cards (for high availability of SATA
drives SATA interposer cards are needed).
Connector A: SFF-8644 (4x HD Mini SAS)
Connector B: SFF-8644 (4x HD Mini SAS)
Data Rate: 12Gbps per channel
AWG30 Twinaxial 8-pair high-bandwidth low-skew wire
Impedance = 100 Ohms
Fully compliant to the latest SAS 2.1 AND SAS 3.0 interface
specifications
Excellent EMI performance
Applications:
DATA Center
Servers, Storage racks, RAID systems
External Storage Systems
SAS/SATA HBA interfaces
Direct-attached storage (DAS)
Switches
