Anti - Wear Hydraulic Drive System / Hydraulic Motor High Efficiency

Hydraulic motor ,Its used in the Submerged Scraper Conveyor:

The installation of the hydraulic motor

Before installate hydraulic motor, please read the hydraulic drive system installation instruction manual carefully, the installation process should be in strict accordance with the "hydraulic drive system installation operation instruction handbook" in the relevant requirements of the motor parts.

Remember: before installate the hydraulic motor, it must be coupling inner hole and drag on the surface of the axle shaft oil dry, can not lubrication!

When tightening bolts, to avoid two clamping ring not parallel, it needs to be a few position measuring pressure ring gap in the whole process between the gap of differential control within 1 mm.
Locking plate bolts tightened rules:

Before tighten to specified torque value of the bolt (50% of the 490 KNM) before the coupling bolts are diagonal pairs tight, and strictly monitor the gap between the compression ring.

After tighten specified torque value of 50% of the bolt, the bolt signed for tags number, and then set for the specified maximum torque wrench, tighten bolts in sequence. Each bolt each twist 1/4 circle, has been turned to the specified torque values (probably at least need to twist 15 ~ 20 times).

After reaching the specified torque values,it still need confirm all bolt has reached the value.

Torque arm installation should be according to the installation drawing. When the torque arm couldn't insert bearing, can loosen nut, fixed torque arm bearing. After the motor installed, it should be tighten nut again according to the requirements of the torque value size.

Hydraulic power station fixed and pipeline connection:

The power station accordance with the requirements of general arrangement with the bolt first, nut firmly fixed on the bracket, and then according to the connection of the hydraulic drive system installation instruction manual power station between the motor and hydraulic line. At the scene of the tube through the platform place cut holes on the platform. Before starting the system and should check whether all the pipe joint in the process of start all tight, with and without leakage. After the connection of the pipe and according to the requirements of the hydraulic drive system installation operation instruction handbook "to inject N46, anti-wear hydraulic oil tank. Drive system should be paid attention to the installation of the hydraulic line also hydraulic tensioning system piping installation note by the terms and conditions. It is important to note in slag machine again after installation ends for all type of lubricating oil of gear train injection of lubricant regulations.

Company Profile：

  Qingdao Kechengyi Environmental Protection and Electric Power Technology Co., LTD. is a comprehensive enterprise focusing on equipment research and development, equipment manufacturing, and service, especially for the thermal power plant auxiliary equipment and environmental protection equipment. The company has rich design and manufacturing experience and many successful performances on the ash handling, slag handling, dust removing, desulfurization and denitration for CFB boiler and pulverizing coal boiler.

  Qingdao Kechengyi Environmental Protection and Electric Power Technology Co., LTD. has established perfect quality control system and carried out the manufacturing and management of the equipment according to the requirements of ISO9001 quality management system; In order to have better participation in the international thermal power field, the company has obtained relevant qualifications to directly import and export the power plant equipment and spares. The company has excellent research and development team and experienced production team, which makes the annual production capacity reaches 4000 tons. The products have been adopted by more than hundreds of power plants at home and abroad for the excellent product quality and after-sales service.

  Company's main products:

  Drum type ash cooler, bucket conveyor, bucket elevator, embedded scraper conveyor, scraper slag conveyor, dry type slag conveyor, hydraulic shut-off gate, single roller slag crusher, steel ash bin, slag bin, de-watering bin, electric feeder, wetting mixer, dry type bulk loader, pressure relief valve, dense phase pneumatic ash conveying system, dilute phase pneumatic ash conveying system, coal ash separation system, pneumatic double gate valve, pneumatic swing valve, cone pump, material seal pump, coal ash separator, cyclone collector, wear-resistant ceramic elbow, tee joints, and various valves.

  Adhering to the "first-class design, first-class products, first-class service" principle, the after-sale service department of the company can provide excellent pre-sale service, sales service and after-sale service to the customers.

  1、 Pre-sale service: dealing with various consultations and questions, and sending professional technical personnel to do on-site investigation to provide preliminary design plan and reasonable suggestions.

  2、 Sales service: the engineering technicians will keep contact with the customers positively so as to adjust the design plan, production schedule, and delivery time immediately based on the needs of the customer and report the progress to them at any time, and do all the best to meet the requirements of customers.

  3、 After-sale service: implement “provide on-site service in 24 hours system”, which means the personnel will arrive the customers’ working site to provide service within 24 hours after we got the call of the customers (in China). We will provide high-quality products and good service to the customers and sincerely welcome new users come to visit our company at the same time.