Tail Tension For Bucket Elevator Conveyor Counterweight Iron Automatic Tensioning Device

The tail tension ,Its material is 45 and Q235,for the Bucket Elevator Conveyor:

Origin: China

Brand: Qingdao Kechengyi

Introduction: the tail tension located at the bottom, it adopted counterweight iron automatic tensioning device, constant tension, tensioning longer journeys.

1. The install foundation must firmly, and shall ensure that the lower section bearing surface in horizontal plane;

2. The central casing connection place should add gasket seal, central chassis centerline should guarantee on the same vertical line;

3. The bucket on the drive sprocket shaft and the lower tension sprocket shaft should be adjusted in a horizontal position;

4. Hopper loaded in the Bucket elevator should not have oblique collision cases happened;

5. Leverage - heavy hammer chain tensioning device is when put a heavy hammer should guarantee the normal work required tension, in order to ensure the tension in the use of institutions have enough tension, installing a tensioning mechanism untapped schedule should not be smaller than 50% of the trip;

6. Hopper on the chain Installated must be strong, the layout is correct, the locking bolt and nut spot welding;

7. Must check whether Bucket elevator on the basis of bending, deformation and tilt, etc.;

8. Bucket elevator installation must be removed after lifting tools used for assembly, after no-load test run, check the reducer, bearing, hopper, chain and various connection place fasteners work situation, found that when a failure must immediately stop, eliminate malfunction;

9. Bucket elevator after load test run, all the faults are removed, until well-functioning, it installed finished;

Company Profile：

  Qingdao Kechengyi Environmental Protection and Electric Power Technology Co., LTD. is a comprehensive enterprise focusing on equipment research and development, equipment manufacturing, and service, especially for the thermal power plant auxiliary equipment and environmental protection equipment. The company has rich design and manufacturing experience and many successful performances on the ash handling, slag handling, dust removing, desulfurization and denitration for CFB boiler and pulverizing coal boiler.

  Qingdao Kechengyi Environmental Protection and Electric Power Technology Co., LTD. has established perfect quality control system and carried out the manufacturing and management of the equipment according to the requirements of ISO9001 quality management system; In order to have better participation in the international thermal power field, the company has obtained relevant qualifications to directly import and export the power plant equipment and spares. The company has excellent research and development team and experienced production team, which makes the annual production capacity reaches 4000 tons. The products have been adopted by more than hundreds of power plants at home and abroad for the excellent product quality and after-sales service.

  Company's main products:

  Drum type ash cooler, bucket conveyor, bucket elevator, embedded scraper conveyor, scraper slag conveyor, dry type slag conveyor, hydraulic shut-off gate, single roller slag crusher, steel ash bin, slag bin, de-watering bin, electric feeder, wetting mixer, dry type bulk loader, pressure relief valve, dense phase pneumatic ash conveying system, dilute phase pneumatic ash conveying system, coal ash separation system, pneumatic double gate valve, pneumatic swing valve, cone pump, material seal pump, coal ash separator, cyclone collector, wear-resistant ceramic elbow, tee joints, and various valves.

  Adhering to the "first-class design, first-class products, first-class service" principle, the after-sale service department of the company can provide excellent pre-sale service, sales service and after-sale service to the customers.

  1、 Pre-sale service: dealing with various consultations and questions, and sending professional technical personnel to do on-site investigation to provide preliminary design plan and reasonable suggestions.

  2、 Sales service: the engineering technicians will keep contact with the customers positively so as to adjust the design plan, production schedule, and delivery time immediately based on the needs of the customer and report the progress to them at any time, and do all the best to meet the requirements of customers.

  3、 After-sale service: implement “provide on-site service in 24 hours system”, which means the personnel will arrive the customers’ working site to provide service within 24 hours after we got the call of the customers (in China). We will provide high-quality products and good service to the customers and sincerely welcome new users come to visit our company at the same time.