Tropical Multifunction Tablet / Capsule Blister Packing Machine CE
Certificate
Description
1. Travel scope can be adjusted.
2. Alu Alu Blister Packaging is available for this machine.
3. Mould is located by locating groove which makes it easy to
change mould. The machine heats the PVC through conduction and
forms it through pressing and frothing.
4. The material is fed automatically. The mould and feeder can be
designed as user’s requirements.
5. Speed is shifted by step-less transducer. Adopt the interface of
human-machine and PLC programmable controller, it can synchronize
accurately.
6. Adopt the equipment of trace pressing, batch number printing and
scarp-collecting.
7. Stepping motor Pulling Material more accuracy and easy adjusting
8. The heating moulds will automatically separate when the machine
stops, which contributes to protect the material between them and
extend the machine’s life.
Applications
This machine is our engineer update based on DPP-160Fmodel and our
clients' feedback infomation,and fetch in advanced technology from
aboard .Strickly improve it according to GMP standard.A waste
material collecting device has been designed to this machine which
can make its function much perfect.
Adjustable stroke:freely change the size of sheet and suitable for
productioln of various kinds of specifications.
Flat-plate framework :It is suitable for pack any kind of shape
,such as square ,triangle.oval and etc.
Positive press forming : makes the bubble's symmetrical
,upright,and make the finished products much perfect.
Specifications
| Double Function | ALU-PLASTIC-ALU | ALU-PLASTIC |
| Cutting Frequency(ideal sizes:80*57mm) | 15-30 cutting/min | 20-45 cutting/min |
| Max. Forming Area and Depth | 250×120×15mm | 250×120×15mm |
| Adjustable Scope of Travel(mm) | 30-120mm | 30-120mm |
| Packaging material(I.D.Φ75) | PVC(mm) | (0.15-0.4)×260×(Φ400) | (0.15-0.4)×260×(Φ400) |
| PTP(mm) | (0.02-0.15)×260×(Φ250) | (0.02-0.15)×260×(Φ250) |
| Alu Alu Foil | (0.10-0.12)×260×(Φ400) | |
| Paper(mm) | | (50-100)g/㎡ ×260×(Φ300) |
| Power | 380V 50Hz 11.5kw | 380V 50Hz 8.5kw |
| Air compression(self-prepared) | 0.6-0.8Mpa≥0.5m³/min
|
| Recycle water or circulating water consumption | 60-100L/h
|
| Overall Dimension(L*W*H)(including foundation) | 4450×800×1600
|
| Dimension of Each Part | 1400×800×1600(front)
|
1650×800×1450(middle)
1400×800×1450(back)
|
| Weight | About 1700kg |
Competitive Advantage
- All of the air supply and synchronization of the machine is
controlled by the encoder. All synchronous data have been
programmed in advance so that there is no need to adjust air supply
and pulling time manually. The machine in other factory use Cam
control, which means the process is mechanical. The biggest
disadvantage of it is that the friction is inevitably which will
lead to wear and tear. As time passes, the synchronization is not
accurate. But our machines use encoder control, so that there is no
need to worry about the synchronization. If the encoder is broken,
you can also buy it in the local, it’s convenient.
- Our machine use Stepper motor to control the pulling length. When
change the model, there is no need to adjust the machine so that
it’s convenient and easy operating. What I want to mention is that
the machines in other factory use gas clip to control the pulling
length. It has two shortcomings. First, when you change the models,
you need to adjust the pulling length manually which means
adjusting screw in the pulling position. If the Operating workers
is unskilled, it will waste the material and time.
- Our machines have PRC (print register control) system, is the
cursor version of function, because the machine is a stepper motor,
so is true of PRC system forever won't generation shift. Other
manufacturers may be gas clip can only be manually adjusted, a long
time after the shift will occur.
