UV Coated Exterior Wall Decorative Reinforced Fireproof Fiber
Cement Board 100% Free Asbestos
Main Features:
Performance like high strength,light weight,fire and water
proofing,green and envirmental friendly,high effcient and
energy-saving.Therefore,this kind of new materials is vigorously
developed and recommedded by the country.
Product Application:
1. Fire-proof structure
2. Fire-proof ceiling
3. Billboard
4. Water-proof Baffle
5. Washboard
6. Flue board
7. Access foor
8. Cabinets etc.
No dust emission,no dust generation,non-oxidation,mold
prevention,insect prevention and moth prevention.
It is Acid and alkali resistance,chemical resistanceWear
resistance,easy cleaning,low maintenance cost.
Class A1 fireproofing,neither toxic gas emission,nor black smoke in
case of buming
Standardized production of the product fiber cement board,site
assembly and easy installation
Specification:
(1). Thickness: 4-24mm
(2). Standard size: 1220*2440mm or 1200*2400mm
(3). Note: other specification is available,such as
915mm*1830mm,1220mm*3000mm
Product Introduction:
Fiber Cement Board is strong and flexible board composed of
cement,refined ores,reinforced cellulose fiber as the main
materials.It's made of autoclaved process under high temperature
and pressure which generates a light-weight,durable and
smooth-faced board for various applications of interior and
exterior decoration.
Product | Compressed Fiber Cement Board |
Dry Density(g/cm3) | 1.3-1.4 |
Water absorption (%) | 28-33 |
Wet expansion (%) | 0.2 |
Water Content(%) | 7-13 |
Bending Strength(Mpa) | 16-22 |
Shrinkage rate(%) | 0.1-0.15 |
Frost resistant | No delamination and crack after 25cycles under freezing and thawing |
Water penetration | No water drop on the board surface |
1. Galvanized Metal Frame
a.The top and bottom keels are fixed respectively top floor and on
floor with expansion bolts.
b. The vertical keel should be aligned well according to the
requirement (generally being 612 mm) with
laterally supporting keel installed.
2. Board Material Package Fixed
a. Cutting the board material to the dimensions needed (about 10mm
lower than wall height)
b. Board material is fixed on keel in anchoring seam way with
tapping screw: the interval of tapping screw is generally
about 200~250mm with screws sinking 0.5mm under the board face.
c. The expansion seam of about 4mm between boards should be kept.
d. The shrouding should be fixed from the middle to the four sides
and cannot be operated at multipoint simultaneously
to avoid generating inner stress to make board material bucking.
e. Before board being packaged and fixed, depending the needs,
glass cotton or rock cotton can be filled
