Concrete Epoxy Industrial Floor Grinder For Edge
If you are focused on edging, floor edge grinder HW-G1 China-made
machinery is the best bet in the business.
On a grinded or polished concrete project, dealing with the edge is
one of the least desirable aspects of the process. HW-G1 floor edge
grinder is the ideal solution for grinding and polish borders,
edges, bathrooms and narrow area where normal floor grinding
machine cannot work. If you do lots of edging work, the floor edge
grinder HW-G1 is for you.
Ergonomic handle permits standing up working position to avoid back
pain and sore knees! Very balance of the grinding plate thanks to
the triangle design of stamping part. The machine with 70kg weight could be
brought anywhere easily and even stored in car trunk.
Parameters
| Model | HW-G1 |
| Voltage: | 220V 1phrase |
| Power output: | 2.2KW,3hp |
| Motor Brand: | China Winder |
| Frequency: | 50/60HZ |
| Current: | 13A |
| Grinding Width: | 280mm/11” |
| Grinding Pressure: | 41KG/90.2lbs |
| Additional Weight: | N/A |
| Dust Port: | Φ50mm |
| Motor Speed: | 1400rmp |
| Diamond Pad Holder: | 6 Pieces |
| Machine L*W*H: | 1100*420*1000mm |
| Net Weight: | 75KG/165lbs |
Advantages
Quick change of diamond pad, no need for tools;
Very easy for transportation and set-up;
Ergonomic working posture;
Easy for machine maintenance
Totally replace angle grinder;
Grinding the edge, 2mm’s distance;
280mm grinding width, for 220v single phrase;
Closer Look
Production Flow
After Sell Service
- One year of warranty for machine.
- Honway always store the spare parts of old models, in case that the
machine needs repair in future.
- The spare parts can be sent out immediately at any time, delivered
by DHL.
- Honway will service you and your machines for years.
- All gear boxes are tested 48 hours before it leaves factory.
- If the customers visit our factory, we could provide the training
lessons.
- We always supply the spare parts for all the old models.
FAQ
Q: If the floor edge grinder could grind floor?
A: Yes, it can; its grinding width is 280mm and its grinding pressure
is 90.2 lbs;
Q: If HW-G1 could grind floor edge and leaves no margin at all?
A: G1 could grind floor edge, but leaves margin of 2mm, which is the
narrowest margin which the floor edge grinder could achieve. It is
impossible for any machine to leave margin 0mm.
Q: If HW-G1 could grind right edge and left edge?
A: Yes. It can; the two sides could grind floor edge;
Q: How about the floating cover of HW-G1?
A: The floating cover follow floor up and down, preventing dust from
entering work site.
