Copper / Aluminium Automatic Double Spooler Durable Max Loading Capacity 500kg

HXE-SX630 Automatic Double Spooler

I. Quick details

SX630 Automatic double spooler with control system is used to take up wire from 1.7mm-4.2mm.

II. Lifting the machine, installation, adjustment

2-1. Lifting, there are four lifting rings to lift.

2-2. Installation, please check the external drawing and foundation drawing of the machine, dig the ground, put the machine in position, check the horizontal level, adjust the ground screws, put concrete slurry, after dry and fix, check the horizontal level again, then fix the machine by the ground screws.

2-3. Adjustment, clean all parts, check all the part no loose.

III. Preparation before working

3-1. Check all parts lubrication conditions,

3-2. Check drawing lubrication oil, cooling water, steam, air pressure.

3-3. After checking, connect to power, according to the Electrical drawing, use foot switch, to make the machine operating in low speed (under 4m/s), if no Abnormal, then can begin to work.

IV. Main technical parameter

1. Applicable wire diameter 1.7mm-4.2mm

2. Max speed 25m/s

3. Max loading capacity 500kg

4. Max length for wire storage 17m

5. Spooler motor power 15kw*2sets (WN motor, China classic brand)

6. Traverse motor power 90w

7. Glide base motor power 0.75kw

8. Control system Dual inverters control system (Inovance brand, China classic brand)

9. Brake Disc brake

10. Wire capture coefficient ≥95%

11. Compressed air capacity 0.4-0.6Mpa, 50L/min

12. Dimension (L*W*H) 3350*3000*2200mm

13. Weight 5300kg

V. Advantage and after-sale service

A: Advantage

(A1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(A2). Body and other key components and parts are produced by our own factory , quality is reliable.

(A3). Our company’s developing process in more than 10 years.

B: After-sale service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(B1) 1 year for mechanical part.

(B2) 6 month for electrical part.

Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.

1. Due to wrong operation while shipping.

2. Due to Buyer`s wrong preparation that may cause damage to the machine.

3. Due to Buyer`s wrong operation that may cause damage to the machine.

4. Not in the consuming part list.

5. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.

6. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.

7. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.

VI. Shipping & Installation

Shipping

There are two lifting rings on the drawing machine, four on then annealing machine.

Installation (See attached drawing)

According to the drawing, make the foundation.

When machine is in position, install bolts and adjust the center line.

When concrete is drying, adjust center line again and fix the bolts.

Adjust

Before adjusting, check and clean all parts.

      Suzhou Hengxie Machinery Co., Ltd was established in 2005, a total professional in drawing machine field, specialized in copper and aluminium wire drawing machines. Located in Suzhou City, very close to Shanghai, we share a convenient transportation and the most successful working environment.

Our 6,700 square meters of land allows producing a wide range of equipment, developing and researching new products. We always strive to introduce the latest international techniques to update our products.

With management concept of “Excellent quality, Reasonable prices, Superior services”, our hope is to not only meet our customers` expectations but to exceed them.

Here are the machines we have: Copper&Aluminium Rod Breakdown machine, Large and intermediate wire drawing machine with online annealer, Intermediate wire drawing machine, Intermediate wire drawing machine with online annealer, Fine wire drawing machine, Fine wire drawing machine with online annealer, Customized fine wire drawing machine with annealer, Super fine wire drawing machine. As long as we talk, we can always meet your detail requirements.

Our market includes both domestic and overseas. Such as Bangladesh, Egypt, Iran, Malaysia, Syria, Algeria, Kenya, Turkey, South Africa, Latin America and so on.

With the concept of “Stable quality and mutual development”, Hengxie welcome all customers from the world to create a sincere cooperation and win-win benefit in the future.