Cu / Cu Alloy Wire Annealing Machine , Water Cooling Conduit Annealing Machine

HXE-TH450 Wire annealing machine for copper rod

I. Application

TH450 Wire annealing machine for copper rod is used to annealing copper wire from 1.2mm to 4.5mm.

II. Working environment

Altitude less than 1000m.

Temperature: －10℃－40℃

Relative temperature less than 85% (25℃)

Power source 380V, 50Hz, can be customized

III. Main technical parameter

1. Usage single bare copper wire annealing

2. Applicable wire diameter 1.2mm-4.5mm, Speed 1500m/min (Adjustable)

3. Annealing method DC. Three-section annealing

4. Annealing current DC 6000A

5. Annealing voltage DC 70V

6. Steam quantity 22kg/h

7. Cooling water capacity 650L/min

8. Compressed air capacity 0.4-0.6Mpa, 50L/min

9. Power source Customize

10. Direction Customize

11. Cooling method Water

12. Protection by Steam

13. Driving by AC 22KW Siemens Motor.

14. Inverter control 22KW, Siemens.

IV. Notes

When installation, make connect the ground wire.

When working, do not open the doors.

Do not touch the wire when annealing.

Regular check Coolant water, Steam, Compressed air.

V. Advantage and after-sale service

1: Advantage

1-1. HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

1-2. Body and other key components and parts are produced by our own factory , quality is reliable.

1-3. Our company’s developing process in more than 10 years.

1-4. DC. three-section annealing

2: After-sale service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

2-1 1 year for mechanical part.

2-2 6 month for electrical part.

Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.

1. Due to wrong operation while shipping.

2. Due to Buyer`s wrong preparation that may cause damage to the machine.

3. Due to Buyer`s wrong operation that may cause damage to the machine.

4. Not in the consuming part list.

5. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.

6. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.

7. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.

      Suzhou Hengxie Machinery Co., Ltd was established in 2005, a total professional in drawing machine field, specialized in copper and aluminium wire drawing machines. Located in Suzhou City, very close to Shanghai, we share a convenient transportation and the most successful working environment.

Our 6,700 square meters of land allows producing a wide range of equipment, developing and researching new products. We always strive to introduce the latest international techniques to update our products.

With management concept of “Excellent quality, Reasonable prices, Superior services”, our hope is to not only meet our customers` expectations but to exceed them.

Here are the machines we have: Copper&Aluminium Rod Breakdown machine, Large and intermediate wire drawing machine with online annealer, Intermediate wire drawing machine, Intermediate wire drawing machine with online annealer, Fine wire drawing machine, Fine wire drawing machine with online annealer, Customized fine wire drawing machine with annealer, Super fine wire drawing machine. As long as we talk, we can always meet your detail requirements.

Our market includes both domestic and overseas. Such as Bangladesh, Egypt, Iran, Malaysia, Syria, Algeria, Kenya, Turkey, South Africa, Latin America and so on.

With the concept of “Stable quality and mutual development”, Hengxie welcome all customers from the world to create a sincere cooperation and win-win benefit in the future.