HXE-WF 800 Coiler for rod breakdown machine
I. Application
WF800 coiler for rod breakdown machine is used to take up wire from
1.2mm to 3.0mm.
II. Main technical parameter
1. Applicable diameter 1.2mm-3.0mm
2. Motor AC 22kw, Speed 1500m/min, adjustable
3. Coiler basket size 800mm
4. Small electric cabinet, 1 set, to connect with the drawing
machine control system
5. Tension device required, if your drawing machine has Tension
device, then no need.
6. Traverse motor AC 1.5kw
7. Speed reduction motor 90w
8. Speed control by Inverter 22kw
9. Air compressor shall be needed during work
10. Basket changing system is equipped
11. Basket block device is equipped
11. All ladders and blockers (Yellow parts) (Screws to fix) will be
removed before shipping
12. The machine is a whole piece to achieve running in high speed
without shake
13. Needs connection wires from the Coiler to the drawing machine
control system
III. Working environment
Altitude less than 1000m.
Temperature: －10℃－40℃
Relative temperature less than 85% (25℃)
Power source 380V, 50Hz, can be customized
IV. Shipping & Installation
Shipping
There are two lifting rings on the drawing machine, four on then
annealing machine.
Installation (See attached drawing)
According to the drawing, make the foundation.
When machine is in position, install bolts and adjust the center
line.
When concrete is drying, adjust center line again and fix the
bolts.
Adjust
Before adjusting, check and clean all parts.
V. Advantage and after-sale service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special
lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our
own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our
company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
