ISO9001 Standard Water Well Bits , 240-311mm Hole Air Hammer Drill Bits

Down Hole Hammer DTH bit SD10 TH10 NUMA100 For Water Well Piling Foundation Drilling​

The drill bits offered by Tianhe Drilling are manufactured to the most stringent standards, using high quality materials to provide you with a reliable, high performance cutting edge for your drilling equipment.

1. General Size introduction

2. Bit Face Shape Selection:

1. Drop Center Bit

----For high penetration rates in soft to medium hard and fissured rock formations.

2. Concave Face

----The all-around application bit face specifically for medium hard and homogeneous rock formations. Good hole deviation control and good flushing capacity.

3. Convex Face

----For high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce theload and wear on the gauge buttons, but poor hole deviation control.

4. Flat Face Bit

----This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications

with high air pressures. Good penetration rates an resistance to steel wash.

3. Carbide Button Shape Selection:

1. Semi-Ballistic Buttons

2. Ballistic Button

3. Spherical Button

4. Two-step Button

4. Photos

Changsha Tianhe Drilling Tools and Machinery Co., Ltd., is a professional geotechnical drilling tools manufacturer since 2002. We’re located in Jinzhou New District,Ningxiang County, Changsha,Hunan province.Our main products include DTH (down-the-hole) hammers and bits with capacity of drilling holes from 64mm--1020mm in diameter, DTH drilling tools with large diameter for deep hole drilling, eccentric casing system (ODEX) and concentric casing system, reserve circulation hammers and bits, drilling rig, rock drilling accessories and other relative equipment. They are widely used in mining,water well and geothermal drilling, anchoring, foundation and infrastructure, piling,tunneling and other construction and geotechnical engineering. They are exported to Sweden,Swiss,Finland,Italy, France, Germany, Australia,South Korea,South Africa,Chile, Brazi and other 30 countries.Teamwhole is proved to be the right choice by more than 1000 customers all over the world.

Our registered capital is 6.5 million USD, and monthly capacity is about 1000 sets of hammers. We have about 300 employees,among them there are 80 specialized technicians,30 of them have over 20 years working experiences in DTH drilling tools research and development. We have the ISO9001:2008 certificate,over 30 technical patents, and 3 registered trademarks.We’re a council unit of China Drilling Steel and Drilling Tools Association,the director unit of China Heat Treatment Association, the well-known trademark enterprise of Hunan Province, the high-tech enterprise of Hunan Province, the geotechnical drilling equipment engineering of Changsha City Technology research center and enterprise technology center.

The company always guide themselves with the service concept "focus on users' requirements and meet to customers" needs " , flexibly apply the unique technology, strictly comply with the standards of ISO9001 quality system, professionally commit to research, development and application, and sincerely produce the rock drilling tools with most specifications, easy operation, reliable quality and good prices for all the global users. With strong technical strength, we are making efforts to creat the best brand of Chinese drilling tools, and to be the top manufacturer in the world.