M6 M8 M10 Yellow Zinc Round Nut / Stamping Nut With 3 Holes For Furniture

M6 M8 M10 Yellow Zinc Round Nut / Stamping Nut With 3 Holes For Furniture

Product Description

1. Standard: ISO9001

2. Size: M6-M10

3. Type: Stamping Round Nut

4. Material: Carbon steel
5. Finish: zinc plated

6. Mainland: Guangdong China

7.Quality: Top high quality

8. Delivery time: Normally in 15-30 days

9. Package: Cartons&pallets or according to customer's requirement.

Round base t-nuts are nice because they are easier to install than 4 prong t-nuts.

They are used in most commercial climbing gyms because they are easy to install and stay secure.

Unlike 4 prong t-nuts you don't need two people to install them properly. You can insert them by hand into the pre-drilled holes in your climbing wall. There are 3 holes in each t-nut which allow you to fasten a couple screws into the wood from behind the wall. These screws will keep the t-nut from spinning and from popping out when you try to fasten a hold to the wall. 3 zinc plated screws are included with each t-nut ordered. If you are willing to spend the extra money you'll save a lot of time!

Specification

Application

Sometimes old T-Nuts become damaged with use or are lost when furniture is moved.

Damaged or lost T-Nuts need to be replaced. T-Nuts provide the nut base into which the

hanger bolt of a furniture leg may be screwed. The hanger bolt screws into the T-Nut and

extends up into a cavity predrilled to sufficient width and depth to contain the screwed in

hanger bolt.

Note about Size

The size of the hanger bolt determines what the size the T-Nut needs to be. These T-Nuts fit

the Metric Size M8 Hanger Bolts. It is important to select the proper size T-Nuts for your

hanger bolts.

Installing the T-Nut

Select the location for the T-Nut installation

If a cavity is already present for the screwed in hanger bolt, all that needs to be done is to tap the T-Nut

into the proper location with the sleeve of the T-Nut extending into the already present cavity.

If no cavity is present for the sleeve of the T-Nut and the hanger bolt, a new cavity will need to be drilled at

the proper location. After the cavity is drilled, then the T-Nut may be tapped into the installation site.

The furniture leg is then securely screwed into the T-Nut and the installation is complete

Our service

Why should you choose us ?

1.We are manufacturer of fasteners for 20 years in DongGuan and got rich

experience, any kinds of standard or non-standard will be customized

according to your drawing.

2. We have the development team, production team, sales team, quality control

department and full array of equipment.

3.We will offer the competitive price and high quality for our clients.

    Jian Long Hardware Co Ltd., In DongGuan , Named Jianye Screws Factory Previously , Is a Special Furniture Screws Manufacturing Corporation With An Area Of 20000 Square Meter ,Who Mainly Produces All Kind Of Self-tappping Screws , Chipboard Screws ,Celerity Thread Screws , Drywall Screws , Hanger Bolt , Nut Etc.

    With Its Complete Screws Manufaturing Crafts , Jian Long Is Equipped With High -Classed Facilities And Technics With A Full Production Line Of Cold-forging And Wire Pulling ,Cold-forging And Thread Forming , Heat Treament , Which Can Guarantee its Powerful And Stable Capability Of Production And Supplies With Yearly Output Of Over 1200 Tons .

    In Combination With Well Effictive And Strict Quality Control , JianLong Always Insits On The Best Quality Lines To Produce High Classed Screw Products . It Has Enjoyed Good Reputation Among All Its Clients Due To Its Perfect Quality , Good Service And Reliable Credit . Products Have Been Well Sold To Many Area Like Southeast Asia , Europe , South America , North America , Africa , Korea , Russia USA And So On . As Well As The Whle Domestic  Cities .