200-800mm HDPE Spiral Winding Tube Making Machine HDPE Large
Calibre Hollowness Wall Winding Pipe
Application of large diameter hollow wall winding pipe :
At present, the sewage and drainage systems in the world still use
the cement pipes. However, due to its instable chemical property
and loose connection, it has become the principle cause for
environment pollution. On the other hand, the cast iron pipes
cannot be used any more for its disadvantages, such as the
inconvenient construction and expensive cost. In recently years,
the plastic pipes have been draw great attention and have become
the substitute products for cement pipes and cast iron pipes. All
these shows that the twisted large diameter plastic pipes have a
great market potentiality.
Usage for 200-800mm HDPE Spiral Winding Tube Making Machine HDPE Large
Calibre Hollowness Wall Winding Pipe
1. The pipe produced by the SGB large-diameter winding pipe
production line uses high-density polyethylene as the main raw
material. The first extruder extrudes the round pipe and sets it
into a square pipe through a shaping cooling machine, and then
enters the winding forming machine. The two extruders extruding the
melted adhesive strip to form a square tube with a spiral form. The
inner and outer walls of the extruder are flat and smooth. The
specifications are φ200-3000mm. According to different conditions
of use, the ring stiffness is divided into 4 levels, and the
maximum can be achieved. 16KN/m2, this kind of pipe has the
advantages of corrosion resistance, light weight, easy
installation, high through-flow, long life (50 years), etc. It can
replace the pipes made of high energy consumption materials
(cement, cast iron, ceramics, etc.), widely used In the highway,
municipal construction, residential quarters, sports fields,
squares, mines, agriculture, culverts, bridges and other areas of
sewage drainage pipelines.
The main specifications of the large diameter coiled pipe
production line are: SGB200-800; SGB300-1000; SGB300-1200;
SGB600-1600; SGB800-1800; SGB1000-2000; SGB1800-3000; users can
also match according to the actual situation of their own units
Main technical diameter & Configurations List:
| Model | extruder | pipe range(mm) | max output capacity(kg/h) | total powder(kw) |
| model | motor powder | ID(min) | OD(max) |
| ZKCR800 | SJ65*30 | 45 | 200 | 800 | 200 | 150 |
| SJ45*30 | 15 |
| ZKCR1200 | SJ65*33 | 75 | 400 | 1200 | 350 | 210 |
| SJ45*33 | 30 |
| ZKCR1800 | SJ75*33 | 90 | 800 | 1800 | 450 | 320 |
| SJ65*30 | 45 |
| ZKCR2600 | SJ90*33 | 160 | 1600 | 2600 | 600 | 400 |
| SJ65*33 | 75 |
| ZKCR3200 | SJ120*33 | 250 | 2000 | 3200 | 750 | 550 |
| SJ75*33 | 90 |
| No. | Item | Qty. |
| 1 | single screw extruder,model SJ65*33 | 1set |
| 2 | single screw extruder, SJ45*30(for melt welding material) | 1set |
| 3 | extrusion die head for rectangular pipe | 1set |
| 4 | die head for melt material | 5pcs |
| 5 | vacuum tank | 1set |
| 6 | cooling trough | 1set |
| 7 | forming machine | 1set |
| 8 | forming mold | 1set |
| 9 | cutter | 1set |
| 10 | stacker | 1set
|
Our service:
Turn key project
Technical documents
We will offer you all necessary documents, e.g. general layout
plan, water scheme, electrical diagram and user manual after the
contract is executed.
Arrangement for inspection, installation and testing work
After being informed machines ready for inspection, customer can
send engineers to our factory.
After the machines are delivered to customer’s factory, we will
send one or two technicians to the factory after preparation work
is completed. Technicians will be responsible for guide on-site
installation and testing machines.
Meanwhile technicians will give free training lessons to labors in
customer’s factory.
After one year quality guarantee period, we will provide after-sell
service for all the life.
