Sensing Range 5 Mm Passive Sensor Switch Compact Speed Monitor M12
Quick details:
Compact speed monitor M12
Cable
Sensing range 5 mm
flush mountable
Technical specification:
The KJT EX34H35 series Variable Reluctance Speed (VRS) sensors
consist of an iron core, an inductive coil and a permanent magnet.
A ferrous pole wheel passing the sensor face changes the magnetic
field strength, resulting in an AC Voltage being induced in the
coil. The frequency of the output signal is proportional to the
speed of the moving target. The amplitude of the signal depends on
speed, air gap, geometry of the target, magnetic properties of the
target material and the electrical load. VRS sensors, also known as
passive or electromagnetic sensors, do not require an external
supply.
The EX34H35 is specifically designed for use in explosive
atmospheres.
Features:
Signal Output: the signal frequency is proportional to the target
speed
Thread Length: 3.5" 3/4"-20 UNEF-2A thread
0-20 kHz Frequency Range
Housing: 3/4"-20 UNEF-2A, tightening torque: max. 40 Nm
Connection: 10' Cable for explosion applications
Coil Inductance: 170 mH +/-10% at 1 kHz
Coil Resistance: 2950 Ohm +/-10%
Coil Magnet Polarity: South pole towards front face
Operating Temperature: -104-257°F (-40-125°C)
Protection: IP68 (Sensor) / IP67 (Cable)
Insulation: housing and electronics galvanically isolated (Test:
500V, 50 Hz for 1 minute)
Additional Information:
| Manufacturer | KJTDQ |
| Model Number | EX34H35 |
| Sensor Type | VRS Sensors |
| Supply Voltage | N/A |
| Mounting Thread | 3/4-20 UNEF-2A |
| Thread Length | 2.5"-3.5" |
| Termination | Leads |
| Additional SKUs | No |
