Lw500fn 5ton Wheel Loader For Construction At Cheap Price
Operating Weight: 17,140kg
Rated Load: 5,000kg
Bucket Capacity: 3.0m3
Dumping Clearance: 3,100mm
Dumping Reach: 1,200mm
Lift Arm Raise Time: 6s
Total Hydraulic Cycle Time: 11s
Wheel Base: 2,960mm
Tread: 2,250mm
Articulation Angle: 35o
Min. Turning Radius at Outer Edge of Bucket: 6,950mm
Grade-ability: 28o
Min. Ground Clearance: 520mm
Travel Speed: 0-38km/h
Max. Breakout Force:162kN
Max. Drawing Force: 160kN
It is with Weichai WD10G220E23 turbocharged diesel
engine(162kw/2,200rpm, china stage ii emissions compliant),
planetary powershift transmission(2 forward shifts/1 reverse
shift), axles with air-assisted oil disc service brakes on four
wheels, fully hydraulic power articulated steering, cabin with air
conditioner, 3.0m3 standard bucket, 23.5-25-16pr tires with tube.
Optional equipment: logging fork(covering three-way hydraulic valve & relative
hydraulic pipes, 3.0m3 standard bucket)
Quality Guarantee: When the good is normally installed, operated
and repaired, the limited warranty will be 13 months or 2,000
operational hours which occurs first from the date of shipment in
any port in China.
Shipment: by roll-on roll-off vessel,bulk-cargo vessel or by the high
container of feu(40’) after dismantling the cabin, bucket, tires,
axles, counterweight, etc.). one 40’ hc can carry one unit.
Lw500fn Wheel Loader Specification
| Description | Unit | Parameter value |
| Rated operating load | kg | 5000 |
| Bucket capacity | m³ | 2.5～4.5 |
| Machine weight | kg | 16900 |
| Dump clearance at maximum lift | mm | 3150～3560 |
| Reach at maximum lift | mm | 1100～1190 |
| Wheel base | mm | 2960 |
| Tread | mm | 2250 |
| Height of hinge at maximum lift height | mm | 4112 |
| Working height (fully lifted) | mm | 5510 |
| Max. breakout force | kN | 170 |
| Hydraulic cycle time-raise | s | ≤6 |
| Total hydraulic cycle time | s | ≤10.5 |
| Min. turning radius over tyres | mm | 5950 |
| Articulation angle | ° | 35 |
| Gradeability | ° | 28 |
| Tyre size | | 23.5-25-16PR |
| Overall machine dimension L×W×H | mm | 8000×3200×3515 |
| Model | | WD10G220E21 |
| Rated Power | kW | 162 |
| Fuel Tank | L | 290 |
| Engine oil | L | 54 |
| Hydraulic Oil Tank | L | 240 |
| Travel Speed | Ⅰ-gear(F/R) | km/h | 13/18 |
| Ⅱ-gear(F/R) | km/h | 40 |
LW500FN Whee Loader Detailed Picture
