Geometric pattern floor medallion do OEM designs shuitou production
center
Water jet cutting is ordinary water after a super high pressure
compressor pressurized to 4000 bar (60000psi), and then through a
small nozzle (the diameter is 0.004 inches to 0.016 inches), can
produce up to 915 meters per second (about three times the speed of
sound) water arrows, and sand material the water flow arrow to
enhance its cutting ability, can cut all kinds of stone, glass,
ceramics, tiles and other materials.
Water jet nozzle is made of hard alloy, sapphire and other
materials, the nozzle diameter is only 0.05 mm, and the hole wall
is smooth, can withstand the pressure of 1700 MPa, high pressure
water so blown out like a knife cutting material. Some water also
added a number of long chain polymers, such as polyethylene oxide,
to increase the "viscosity" of water, making the sprayed water like
a "fine line". Its machining precision is high, the cutting width
is only 0.1 - 0.8 millimeter, and the complex parts can be
machined.
Stone production process has many processes! First of all, the
design department confirmed with the customer consistent color, the
color and the CAD diagram to the computer room computer produced
drawing.
Computer graphics include:
1. Point layer (dividing a layer to separate the different colors
of the material)
2. Typesetting (the dispersed components are arranged regularly
according to the size of the actual material)
3. Treatment
4. Compiling
5. Audit
6. Decomposition drawing
The cutting member input file path according to the computer
drawing , the water jet machine automatic processing can be cut out
and all the objects shown in the drawing.
The cutting is finished to parquet parquet process, is a completely
manual job. The parquet also should be cut out of the bottom edge
parts grinding smooth, easy to display the mosaic, mosaic by
computer drawing trial spell is the puzzle typesetting. Try to
spell after AB glue paste, in order to make the surface smooth
graphics, paste graphics on the surface of the glass table, but
also with iron pressure setting. Such as viscose dried, with iron
will in turn in the surface above the puzzle glue, then rinse with
water.
Whether it is stone or ceramic mosaic before packing to go through
strict quality inspection, including the overall size, surface
smooth, clean, counterpoint, color lines and so on, to pay all the
quality requirements for packing. Because the stone mosaic, ceramic
mosaic is a fragile product, so the packaging requirements are very
high, with transparent grease proof paper wrap the surface of the
product, pre-imitation scratch, then the bubble edge, avoid broken,
finally fixed with wooden packaging, labeling, the whole production
process is completed.
Product detail
| MOQ: | 10 m2 |
| Production line | 7 lines |
| Lead time | Within 1 month |
| Factory | Shuitou Fujian |
| Seaport | Xiamen |
| Key word | floor medallion |
Regular medallion tile Packing:
a design a carton,artons / pallet, 13-15 pallets / 1*20'FCL
