10mm carrara white tile customized cut to size xiamen factory best
price
Carrara White marble is one of the iconic luxury Italian marbles
featuring shades of white and gray. Carrara marble slabs are
offered in polished and honed finishes, and a wide variety of floor
tiles, wall white carrara tiles, and mosaics are available to
create stunning marble countertops, waterfall islands, marble tile
floors, and accent walls throughout both residential and commercial
properties.
Natural stone may be characterized by dry seams, pits, fossils. In
polished and honed stones, these areas are often filled at the
factory. In rustic or tumbled stones as well as with some honed
limestones, these are often filled with grout during installation.
Whether filled at the factory or during installation, the fill can
work its way out of the voids. In these instances, it may be
necessary to refill these voids as part of a normal maintenance
procedure. David Stone encourages all customers to approve physical
samples of white carrara tile before purchasing. The digital
pictures may be subject to variation due to individual monitor
settings.
Natural stone is a product of nature and is therefore subject to
natural variations of color, shading, veins, markings and texture
from piece to piece. The typical variation of a stone is dependent
upon the type of stone selected. No claims will be accepted after
materials are fabricated or installed. We extend no guarantees;
expressed or implied, as to slipperiness, wear resistance or
maintenance procedures. All natural stone is subject to some
wearing or scratching over time. Please keep in mind that our
products have the highest quality in terms of material grade,
surface processing and finish. Rest assured that you will not be
getting any rejected or defective items.(Beware that in most of the
listings online, commercial grade, defective or rejected materials
are traded). Please make your comparisons keeping all these in mind
and place your orders accordingly for your own benefit.
Complete marble polishing process
1, Dry grinding, use stone refurbishing machine to remove the skin
from carrara marble slab. Remove the dirt on the stone surface and
open the stone pores.
2, Deal with stone contamination and chemical reagents to remove
stone contamination.
3, Waterproof, prevent wet grinding later, sewage infiltration into
the stone.
4, Fill the seam and glue, for the sake of overall beauty.
5, Wet grinding, water from 501503005001000200 3000 in polish. At
present, there are 3 steps to turn up new films in China, so as to
save construction time.
6, 1000, 2000, 3000 have been fine polished (the whole
refurbishment), such as simple polishing: wax (if there is wax),
cleaning, wire cotton or animal wool mat grinding.
7, Surface crystallization (glaze to ceramic tiles) with a crystal
surface machine with 100 clean pads and crystalline powder, on the
stone surface to do a layer of protective layer to prevent dirty
infiltration into the stone inside can also play a certain anti
scratch function. At the same time, improve the brightness of the
stone. The effective protection period is about 1 years.
8, Waxing function is similar to step 7. Its validity period is
basically 3 months.
| Quarry Origin | ITALY |
| Marble type | white marble with grey veins |
| Thickness | 10mm |
| Cut to size | Customized |
| Density | 2710 Kg/m3 |
| Water absorption | 0.10% |
Flexural Strength | 19-21.8Mpa |
Compressive Strength | 125-127Mpa |
Linear thermal expansion coefficient | 5 x 10-3.7 0 c-1 |
Block imported from Italy:
Package:
tile size:60*30*1cm
180pcs into a crate, 23 crates into a container of 22tons
Factory tour:
Hundreds of workers at our 80000sqm workshop - it means you have
the bottom price from our mass production that the blocks imported
from Italy directly with top quality of ISO90001 system.
