Sand Washer / Sand Washing Machine With Low Maintenance Rate And
Cost Reduction
1. Working principle of ore dressing equipment sand washing machine
In the production operation, the motor drives the impeller to
rotate slowly after decelerating through the triangle belt, reducer
and gear. The sand and stone enter the washing tank from the
feeding tank, roll under the drive of the impeller, and grind each
other to remove the impurities covering the surface of the sand and
stone, and destroy the water vapor layer covering the sand, so as
to facilitate dehydration; At the same time, add water to form a
strong water flow, timely take away impurities and foreign bodies
with small proportion, and discharge from the overflow outlet
washing tank to complete the cleaning effect. Clean sand is taken
away by the blade, and then the sand is poured into the discharge
trough from the rotating impeller to complete the cleaning function
of the sand and stone.
2. Advantages of ore dressing equipment sand washing machine
(1) Stable performance:
Simple structure stable performance, compact structure, large
production.
(2) Product quality, uniform particles:
When washing sand, the loss of medium fine sand and stone powder is
very little, and the sand washing is cleaner.
(3) Low failure rate:
Wear resistant parts, low failure rate, long service life.
(4) Low maintenance rate and cost reduction:
The sand washing machine has a long service life and rarely needs
maintenance, so the cost can be greatly reduced.
(5) High automation, safety and reliability:
Automatic detection, safe and reliable, set vibration display and
alarm device, if the equipment occurs bad operation, can issue a
warning, so that the equipment stops working, to protect the
purpose of the machine.
4.Product parameters of ore dressing equipment sand washing machine
(1)XS series sand and stone washing machine ore dressing equipment
| SPEC | XS2600 | XS2600Ⅱ | XS2800 | XS3200 | XS3600 |
| Wheel bucket diameter(mm) | 2600 | 2600 | 2800 | 3200 | 3600 |
| Speed(rpm) | 0.8-1.2 | 0.8-1.2 | 0.8-1.2 | 0.8-1.2 | 0.8-1.2 |
| Processing capacity(t/h) | 20-50 | 30-70 | 50-100 | 80-120 | 120-180 |
| Motor power(kw) | 5.5 | 5.5 | 7.5 | 11 | 15 |
(2)WCD series sand and stone washing machine ore dressing equipment
| Model | WCD-1500 | WCD-1118 | WCD-914 | WCD-762 | WCD-610 | WCD-508 |
| Screw diameter (mm) | 1500 | 1118 | 914 | 762 | 610 | 508 |
| Tank length (mm) | 10512 | 9554 | 7815 | 7620 | 7225 | 6705 |
| Washing size (mm) | ≤10 | ≤10 | ≤10 | ≤10 | ≤10 | ≤10 |
| Production capacity (t/h) | 130～220 | 100～175 | 75～100 | 50～75 | 40～50 | 20 |
| Screw speed (RPM) | 13 | 18 | 20 | 26 | 32 | 38 |
| Motor power (KW) | 18.5 | 15 | 11 | 11 | 7.5 | 5.5 |
| Water consumption (t/h) | 14～190 | 20～168 | 10～80 | 9～63 | 6～63 | 6～60 |
| Machine weight (t) | 16.5 | 8.6 | 6.5 | 5.2 | 3.8 | 2.6 |
