Robot automatic fiber laser welding machine CNC Laser metal sheets
& tubes welding machine
Laser welding - process introduction,
Laser technology uses a polarizer to reflect the beam generated by
the laser to concentrate it in the focusing device to produce a
beam of huge energy. The workpiece melts and evaporates in a few
milliseconds, so this effect can be used in the welding process.
The characteristic of laser welding is that the deformation of the
welded workpiece is very small, there is almost no connection gap,
and the welding depth / width ratio is high, so the welding quality
is higher than that of traditional welding methods.
Laser welding can be realized by continuous or pulsed laser beam.
The principle of laser welding can be divided into heat conduction
welding and laser deep penetration welding.
The commonly used laser welding methods are mainly divided into
three categories,
1. Laser self fusion welding. This welding method needs less test
parameters to be adjusted and the welding operation is simple. It
is often used to weld thin plate materials.
2. Laser wire filling welding, this kind of welding method is to
add welding wire to the metal molten pool through the automatic
wire feeding device during the welding process, and make it melt
and weld by using the heat energy of the laser beam.
3. Laser hybrid welding, that is, composite laser beam and other
welding heat sources, is commonly used in materials that are
difficult or difficult to weld by the first two welding methods,
such as thicker stainless steel and light alloy.
Laser + arc hybrid welding - equipment capability,
At present, PSL laser is equipped with many sets of high-power
Robot laser welding equipment, covering laser self fusion welding,
laser wire filling welding, laser CMT arc composite welding and
other processes. It can weld carbon steel, aluminum alloy, copper
alloy, titanium alloy, stainless steel, nickel base alloy pipe and
other materials.
