Corrugated carton box rotary die cutting machine
1. The plate of machine is from 40 mm thick cast iron material,
never deformation with treatment annealing, shock absorption
performance is good, the machine runs smoothly. All drive roller
shaft all fine grinding, the hard chromium plating processing
2. The machine with automatic cycle to ink system, pneumatic
diaphragm pump for ink stability, operation maintenance simple. The
ink filter, filter impurities, ink separation .Simple operation
clean, ink quantity can trace adjusting. ink roll section can air
rises and single rotation, in case the ink dries up and convenient
to clean ink roll
3. Wave plate gap adjusting device, eliminate the traditional
eccentric gear resulting from the adjustment of the up and down the
roll, ensure board running more smoothly, printing design more
clearly
4. Machine phase using planetary gear structure electric digital
phase controller 360 degrees adjustment (running ,stop all can
adjust), can adjust to the first position, making using life more
long and easy to adjust accurately
5. Drive gear use 45 #, according to the high precision request
processing manufacturing and become, and the spray lubrication
mechanism, service life more long , low noise, smooth operation
6. Each unit separate by electric, locking and relax by pneumatic
.The machine with alarm warning, light hint increase the safety in
operation. The machine with lock device, ensure the stability when
running.
7. Front and back the equipment are equipped with urgent stop
switch, control stop or feeding.
8. CAD module design can be arbitrary combination multicolor
printing unit.
9. With automatic counting device, can show the production
quantity, and the machine can automatic stop after finish the
order, the anilox roller automatic lift and distributing.
