Product name:
UV Resistance After Expand Cold Shrink Tubing For Different Cable
Tube
Description:
Cold shrink tubing made of EPDM rubber, which helps ensure the
protection of wires, pipes and cylinders. It can also be used to
ensure moisture and corrosion and places where it is only
collected, relieved or protected and sealed.
God protection against moisture, pollution, corrosion, ozone, UV
radiation and radioactive radiation.
EPDM rubber is put on a piece of spiral wound plastic, which
ensures quick and easy installation without the use of hot material
and requires no installation training.
Functions:
Simple and quick installation, without tools.
Custom sizes from 12 mm – 70 mm. Covers many different cable sizes.
Tighten the seal, even after many years, and keep the elasticity.
No mastic, tape or mold mass is needed.
Applications
◆ Protection and repair for outer sheath of high voltage cable
joint;
◆ Fire protection of cables and connectors;
◆For all base materials that need to be insulated against fire;
Product picture for your reference.
Introduction:
EPDM cold shrink tube: applied in electrical power industry, telecommunication industry or other tool product handle, eg.
bicycle handle etc. With it’s good performance: water-proof, Acid
and alkali resistance, seal, protection sleeve and low voltage seal
insulation under 1kv.
| Material technical parameters: |
| No | Items | Test method | Unit | Test standard | Remarks |
| 1 | Hardness (Shore A) | GB/T 531.1-2009 | Shore A | 43±5 | |
| 2 | Tensile strength | GB/T 528-2009 | Mpa | 8±3 | |
| 3 | Break elongation | GB/T 528-2009 | % | 800±200 | |
| 4 | Tear strength | GB/T 529-2008 | kN/mm | 38±5 | |
| 5 | Volume resistivity | GB/T 2439-2001 | Ω•cm | ≥1013 | |
| 6 | dielectric strength | GB/T 1695-2005 | MV/m | ≥18 | |
| 7 | dielectric Constant(50Hz) | GB/T 1693-2007 | / | ≤8 |
|
