| System operating parameters |
| Dimensions | See the design drawings for details | Power and frequency | 220V 20A 50HZ |
| Total power | 3kw ~ 4kw | Air pressure | 0.5~0.8MPa Purify and oil-free |
| Working temperature | -20℃ ~ 60℃ | Working humidity | Below 50% relative humidity |
Company profile
Key Technology relies on the Key Laboratory of Pattern Recognition
of the University of Science and Technology of China, and has a
high-level doctoral R&D team covering the entire technology
chain of optics, mechanics, electricity, computing and software.
Through the project practice in the fields of packaging containers,
3C, medicine, textile, food, etc., the KVS-AI software and hardware
platform has been created, so that AI technology can be transformed
into real productivity.
Overview:
The overall equipment integrates mechanical mechanism, visual
optical hardware and detection system software, rejecting and
counting devices for defective products. The products to be
inspected are sorted by the vibrating plate (not included in this
plan), and are stable and orderly. They are sent to the glass
turntable inspection station for sequential inspection. After
comparing and analyzing the image processing software with the
standardized sample, the good and bad products are judged.
The defective products are automatically eliminated online, and the
counting function can be realized after the finished product is
tested. After the product is inspected, it can be transported by
the export conveyor line to the back-end for the next packaging
process.
Inspection principle
Our company's design scheme adopts 16 sets of high-pixel area array
industrial cameras and high-performance strobe light sources, and
conducts comprehensive inspections on the top, side, and concave
defects of the product. The design inspection speed of the entire
set of inspection equipment is 400 pieces/minute , The equipment
can operate 7*24 hours a day, and the unqualified products can be
automatically eliminated online.
After-sale service
The company has a complete technical service team and rapid
response mechanism, and has dedicated service specialists for each
customer, who can receive technical consultation and fault reports
from customers at any time. And to ensure rapid response to
customer emergencies, to ensure that customers receive satisfactory
service.During the epidemic or due to special reasons, when
after-sales engineers are unable to reach the site, the service
center can remotely adjust customer equipment for troubleshooting
and technical consultation.
After the equipment arrives at the customer site, the after-sales
engineer arrives in time to carry out equipment installation,
commissioning, and operation training. The product quality of the
whole machine is traceable, and the quality warranty period is 1
year from the date of acceptance. In the event of non-human faults
during the warranty period, after-sales engineers will quickly
arrive at the site or provide remote guidance for free maintenance.
