Product Description
ZKManet2421UM is a compact and portable unmanned carrier device
with high definition and stable image quality developed by our
company. Adopting the current leading OFDM modulation technology,
it can realize shooting and real-time transmission of high-quality
images in non-line-of-sight (non-visual), high-speed movement,
encrypting images and data during transmission, and supporting
frequency hopping at 800MHz, 1.4GHz, 2.4GHz, transmission rate of
30Mbps and 5-15KM air-to-ground transmission, which is very
suitable for long-time and high-dataflow wireless transmission
applications.
Features
1. IP data transparent transmission;
2. Support webcam access;
3. Long transmission distance, line-of-sight 5-15km;
4. Supports transmission at 800MHz, 1.4GHz, 2.4GHz frequency
hopping;
5. Small and portable design, aluminum alloy with good thermal
conductivity, impact resistant;
6. Supports unicast, multicast, and broadcast propagation methods,
and any node can communicate with each other using these three
methods.
Small in size, light weight.
Long transmission distance.
Low transmit power.
Low power consumption.
Network interface and serial interface.
Product Parameters
| Item No. | ZKManet2421UM | Band | ZKMANET |
| RF Parameters | Working Frequency | 800MHz, 1.4GHz, 2.4GHz |
| Working Bandwidth | 1.4MHz/3MHz/5MHz/10MHz/20MHz |
| RF Channel | 1T2R |
| Transmit Power | 25dBm |
| Coverage Distance | 5-15KM |
| Network Parameters | Networking Methods | Point to point, point to multi-point |
| Throughout Rate | 30Mbps(Max) |
| Encryption | ZUC,SNOW3G,AES 3 encryption methods available |
| Conflict Management | When two or more self-organized networks interfere with each other,
automatic frequency tuning or bandwidth reduction is performed. |
| Physicals/Environments | Dimension | 102*52*21.5mm |
| Weight | 124g |
| Working Temperature | -40ºC~+65ºC |
| Electrical Characteristics | Power Supply | DC12V |
| Power Consumption | <37dBm |
| Other | Data Interfaces | RJ45*2,TTL*1 |
Detailed Photos
- 1. Power Cables - power supply input line, red is VDD, black is GND
- 2. Data UART Port (GND, Rx, Tx) - 3.3V TTL
- 3. Link Status Indicator - When the device works as an access node, if
the connection with the central node is normal, the indicator will
be always on. When the device works as a central node, this
indicator is off.
- 4. Micro USB Port - For device software maintenance.
- 5. Indicator (Red) for Power - Always on during normal operation.
- 6. Indicator for Ethernet Port 2 - Flashes according to the data flow when works
normally.
- 7. Ethernet Port 2 (RN, RP, TN, TP) - Ethernet port 1 and 2 are
internally bridged
- 8. Indicator for Ethernet Port 1 - Flashes according to the data flow when works
normally.
- 9. Ethernet Port 1 (RP, RN, TP, TN) - Ethernet port 1 and 2 are
internally bridged.
- 1. Product Label
- 2. Air Inlet - for the cooling fan
- 3. ANT2 Port - Auxiliary antenna, works as auxiliary receiving, NO
transmitting.
- 4. ANT1 Port - Main antenna, work mode is TDD
transmitting/receiving.
Application
FAQ
