Reliable partner of high quality wire production
F2010-k adopts laser diffraction measurement method, known for its
simple structure and high accuracy.There is no motor, allowing for
easy maintenance.
It applicable to the measurement of transparent and nontransparent
objects, like electrical wires and cables, steel wires, enamelled
copper wires, ,3D filament etc.
Extremely short exposure time of 0.5us
High-speed laser micrometer Measurement is accurate even on
vibrating object.
capable of capturing object image without any blur shadow,promising
accurate measurement.
Single axis sampling frequency of 10 KHz
Sampling frequency can reach to 10KHz due to no motor running speed
limitation,which enables to get more information of the object
under measurement.
Applications
Touch Screen,Computer,Cellphone
DALA F2010-K can be managed by computer ,cellphone and Touch
screen,like parameter setting ,measurement data management ,
and so on,customers can choose as their application request.
Technical Specification
| Model | F2010-K |
|---|
| Axis | 2-axis |
| Measurement data | diameter, ovality, lump and necks |
| Frequency | 10KHz/axis |
| Measurement range | 0.2~10mm |
| Repeatability(1) | ±0.1μm |
| Accuracy(2) | ±(0.0005+0.01%*D)mm |
| Min defect height | 0.01mm |
| Min defect length(3) | 0.2mm(wire speed120m/min)
0.8mm(wire speed500m/min) |
| Size | 155*140*58mm |
| Working power source | 24V ±10% 40VA |
| Running temperature | 5℃~50℃ |
| Display | LED display |
| Commuincation port | Standard:WIFI,RS485 MODBUS RTU,CAN Option:PROFIBUS,PROFINET, EtherNet/IP,EtherCAT |
| Data colletion & analysis | available (option DS14 ZT display and control system,DMS1000) |
| Out-of-tolerance alarm | available |
| Transparent mode | available |
Note:
(1) set sliding window as 100ms, outside diameter repeatability of
φ1mm round rod at measurement center area
(2) set sliding window as 100ms, outside diameter deviation of φ1mm
round rod at measurement area
(3)set defect measurement average time as 0ms, the minimum defect
length which cannot be missed at the measurable area
(4)PI feedback control is option, but must order at placing order
