YUCHAI YC6MK
·HPCR fuel system.
·Leading technology of turbocharged & intercooled . four-valve and
slactracontrol, accurate and rapid combustion, good emisslon, good
transienresponse performance and slrong loading capacity.
·High strength cylinder block, alloy forged steel crankshaft, alloy
steet connecting rod and internal cooling oil channel piston make
the éngine moredurable, with lighter and more compact structure in
simllar products
·In terms of product performance and emission, compliance with
therequirements of G3 performance in GB2820 and the requirements
ofChina lll (T3)in GB 20891,respectively.
Specifications
Open type:
1. The generator set has the functions of self-start, self-stop and
self-switching
2. The control panel is an AMF LCD control panel, which displays
voltage, current, frequency, water temperature, and oil pressure.
3. With low oil pressure, high water temperature, overspeed, and
overload protection functions
4. The product has the advantages of high power, low fuel
consumption, low noise, low emissions, easy starting, strong
reliability, stable performance, simple operation, and convenient
maintenance.
5. The supporting equipment has compact structure and flexible
installation location;
6. The maintenance operation is simple, there are few people, and
it is easy to maintain during the standby period.
Slience genset:
The noise reduction box generator set is equipped with a bottom
fuel tank, an air inlet system, an air exhaust system, a
highefficiency silencer, a smoke exhaust system, a unit operation
door, a equipment access door, and a blinds. The exterior ismade of
steel plate and the interior is made of high quality sound
absorbing materials. The reasonable and environmentallyfriendly
design can achieve the effect of noise reduction and shockproof,
and the structure is very stable, which is convenientfor lifting
and transferring, making it dificult to be damaged in a harsh
environment. it can be designed as a fixed and trailermobile power
station. The internal and external structural dimensions of the
noise reduction box vary according to the sizeof the relevant main
parts. The high performance and high standard of reasonable
structure can be tailored according to thecustomer's site use and
related requirements. product.
Main technical parameters:
| model | ZC345GF1 |
| Prime Power(kW) | 200 |
| Standby Power(KW) | 20. |
| voltage (V) | 400/230 |
| Current (A) | 360 |
| Speed (r/min) | 1500 |
| Frequency(Hz) | 50 |
| Rated power factor | 0.8 |
| The generating set consumes electricity L/h | 60 |
| Steady state voltage deviation (%) | ≤±2.5 |
| Transient voltage deviation (%) | 100%The sharp reduction power | ≤+25 |
| Sharp increase power | ≤－20 |
| Voltage recovery time (S) | ≤1 |
| Voltage unbalance degree(%) | ≤1 |
| Voltage modulation (%) | 0.3 |
| Frequency drop(%) | ≤5 |
| Steady state frequency band (%) | ≤1.5 |
| The relative frequency adjusts the drop range (%) | ≥7.5 |
| Relative frequency setting range of rise (%) | ≥2.5 |
| Transient frequency deviation (%) | 100%sharp reduction power | ≤+12 |
| Sharp increase power | ≤－10 |
| Frequency recovery time (S) | ≤5 |
| Relative frequency tolerance band % | 2 |
| Phase and connection | Three phase four wire |
| Start mode | Dc 24V electric starting |
| voltage regulating mode | Automatic |
| Cooling | Closed, water cooled |
| Excitation way | Brushless (AVR) |
| Engine modle | YUCHA IYC6MK350-D30 |
| Alternator modle | EVOTEC TCU288D |
| Weight kg | 2100 |
| Size (L*W*H)MM | 2830*1030*1540 |
Technical Date Sheet:
| Model | YC6MK350-D30 |
| Type | Vertical,in-line,water-cooling,four-stroke |
| Air intake mode | Turbocharged&intercoolded |
| Cylinder quatity-bore×stroke(mm) | 6-123x145 |
| Displacement(L) | 10.34 |
| Compression ratio | 16.8:1 |
| Prime power /Speed(kW/r/min) | 240/1500 |
| Standby power /Speed(kW/r/min) | 264/1500 |
| Min, fuel consumption rate(g/kW.h) | ≤195 |
| Start mode | Electric start |
| Oil capacity(L) | 30 |
| Fuel system | HPCR |
| Oil fuel ratio (g/kW·h) | ≤0.1 |
| Dry weight (kg) | 1030 |
| Dimension(L×W×H)mm | 2088×1130×1392 |
| Emission | Non-road T3 |
| Overhaul period | ﹥10000 hours |
Manufacturing
Equipped with state-of-the-art manufacturing machinery from Germany
and Japan, YuchaiHI possesses a well-established production
capacity in laser underlay, robot welding, narrow space welding,
multi-layer multi-pass welding, anti-deformation control, CNC
machining, and more.
The company has the capability to perform surface treatments on
parts, including phosphate electrophoresis, shot blasting, and
painting, across its five production lines.
With four complete assembly lines, turning machines, and tightening
machines, YuchaiHI can meet an annual production capacity of 10,000
units.
