Three box- type hot and cold impact chamber or temperature schock
chamber
Product Description
Mainly used in national defense industry, aviation industry,
automotive parts, electronic components, plastics industry, food
industry and other related product development, straightening
management engineering test specifications. The regenerative cold
and hot shock tester is widely used in electronic parts,
semiconductors, metals, chemicals, materials and other testing
equipment. Its characteristics are as follows:
1. Touch-controlled color man-machine interface + PLC + J import
temperature controller
2. Setting cycle and defrosting times;
3. Display of abnormal and fault points with simple teaching
reminders for troubleshooting;
4. Comprehensive system safety protection and power outage memory;
5. Multiple safety protection: refrigerant high voltage protection,
compressor overload protection, current overload protection,
overtemperature protection, leakage protection
6. Air-cooled or water-cooled cooling can be selected according to
customer's requirements.
Applicable Industries:
Three Boxes Hot and Cold Impact Test Chamber Thermal Shock Machine
used to test the material structure or composite material in an
instant by the extremely high temperatures and very low temperature
continuous environment which can endure the degree of order in the
shortest possible time to test its thermal expansion and
contraction caused by chemical changes physical harm.
The applicable the object material, including metals, plastics,
rubber, electronic, ..., etc., can be used as the basis of its
product improvement or reference.
Features:
1.Thermal shork chamber in each zone for peak demand of heating and
cooling. Provides extra thermal energy to efficiently meet the
MIL-STD 883 requirements.
2.Temperature recorder provides 24 hour part temperature recording
as the load travels from zone to zone. Using touch-control graph
control as operation interface, easy to operate.
3.The system can be used for automatic Circulation Shock or manual
selective shock, capable of setting two zones or three zones shocks
as well as cold and thermal shock start-up.
4.Custom-made and optional accessories available.
Corresponding Standard:
GB11158 GB10589-89 GB10592-89 GB/T10586-89 GB/T2423.22-2001
GB/T2423.1-2001 GB/T2423.2-2001 GB/T2423.3-93 GB/T2423.4-93 ASTM
D1735 EIA - 364-59
IEC60068-2-1.1990 IEC60068-2-2.1974 IEC 68-2-30 IEC68-2-03 EIA -
364-31C
Product details
| Inner tank volume | 49L |
| Inner box size | 40cm*35cm*35cm |
| Low temperature range | -10~-60°C |
| High temperature range | +80~+200°C |
| Test temperature range | -40~+150°C |
| Recovery time | 3~5 minutes |
| Temperature fluctuation | ±2°C |
| Temperature uniformity | ±2°C |
FAQ
1. If I want to visit your factory, is the traffic convenient ?
Our company traffic is very convenient, it is only 10 minutes by
car or taxi from our city light rail to our company, we also can
arrange the shuttle bus for you to our factory.
2. Does your product have CE certification ?
Yes, we not only have the CE certification,but also have the
FCC,ISO,etc.
3. If there is not any size meet my need, can I customiz ?
Of cause, we are the 20 years factory that with the rich experience
in custom made service,not only can provide the customiz
serivice,but also can provide the professional advice.
