Working conditions: power supply 3 phase 380V, air pressure 6~8Kgf,
connect the air pipe according to the mark on the equipment(Φ10) ,
connect the power cord (more than 2.5 square meters), ventilate
first, and then power on (in the reverse order when turning off the
machine, turn off the power first, and then turn off the air
pressure) installed power 28KW
Main functions:
The production line consists of a raw material storage unit,
embossing and slitting unit, printing machine and winding machine.
1:Use the servo motor to lay the cable, roll the 5~15MM wide strap,
and select the corresponding bandwidth through the touch screen to
roll, without manually changing the transmission gear.
2: Paper core size: ID200mm*Height170mm~190mm, after the winding is
completed by the machine automatically stops, manually change the
roll
3: 12 units individually controlled dual servo motor winding heads,
the rewinding shaft uses servo gear motor, the speed of rewinding
is the same as the speed of slitting machine. So that different
grams or width of the paper strap with the appropriate torque for
winding, try to reduce the bending deformation of the paper strap
after winding.
4,Dimensions:(Approx.. ) L17000MM*W1500*H1800MM
5, The main accessories and origin:
1) The slitting knives made in Japan
2)Frame: 25mm iron plate, 8# channel steel and 80*40mm square tube
welding composition
3) The printer can print the desired logo on each paper strap
(4) Slitting machine motor 2.2KW, embossing department motor 0.4KW,
waste rewinding motor 0.75KW.
(5) motor: winding main motor (1.5KW, 1:8 deceleration servo motor,
(domestic, Wuxi Xinjie) Arranging motor ( 0.4KW, servo motor, Wuxi
Xinjie (domestic).
(6) PLC, touch screen: Wuxi Xinjie.
(7) pneumatic components: solenoid valves and pressure gauges:
Taiwan Yadek, cylinder: Donghao pneumatic (Wenzhou)
8) Sensors and proximity switches lights: Korea Otonix
9) Surface treatment:high-temperature spraying, chrome plating,
blackening treatment.
