| With display | No |
|---|
| Voltage type for actuating | AC/DC |
|---|
| Rated operating voltage Ue | 200 V |
|---|
| Rated control supply voltage at AC 50 Hz | 100 V |
|---|
| Rated control supply voltage at AC 60 Hz | 100 V |
|---|
| Overload current | 28.3 A |
|---|
| Controller type | SMC-3 |
|---|
| DV/DT protection | 1000V/µs for power circuit |
|---|
| Repetitive peak voltage | 1400V per UL/CSA/NEMA for power circuit |
|---|
| Operating frequency | 50/60 Hz per UL/CSA/NEMA for power circuit |
|---|
| Line connected motor power, max | 45 kW @ 380/400/415V AC, 50 Hz, 3-phase |
|---|
| Delta connected motor power, max | 25...100 Hp @ 460V AC, 60 Hz, 3-phase |
|---|
| Overvoltage category | III per IEC for side mount auxiliary contacts |
|---|
| Rated impulse voltage | 6 kV for power circuit |
|---|
| Dielectric withstand | 2500V AC per IEC for power circuit |
|---|
| Line connected motor current | 28.3...85 A @ 380/400/415/460V AC, 3-phase |
|---|
| Delta connected motor current | 50...147 A @ 380/400/415/460V AC, 3-phase |
|---|
| Insulation voltage | Rated 600V AC per UL/CSA/NEMA for power circuit |
|---|
| Rated operational voltage | 250V AC/30V DC per UL/CSA/NEMA for Side mount auxiliary contacts |
|---|
| Rated control power during start with fan | 200 mA @ 120V AC/100 mA @ 240V AC, 700 mA @ 24V AC/DC |
|---|
| Input OFF-state current | <10 mA, <12 mA @ input OFF-state voltage (IN1, IN2) for
control circuit |
|---|
| Short-circuit protection device list | Non-time delay Thermal magnetic circuit breaker High capacity time
delay class CC/J/L |
|---|
| Number of contacts | TB-97, -98 (OVLD/Fault): 1 for auxiliary contacts |
|---|
| High capacity available fault current, max | 70 kA @ 600V, maximum current 300 A time delay Class J or Class L
fuse for inside delta connected motors |
|---|
| Type of current | TB-97, -98 (OVLD/Fault): AC/DC for auxiliary contacts |
|---|
| Conventional thermal current (Ith) | TB-97, -98 (OVLD/Fault): 1 A for auxiliary contacts |
|---|
| Type of control circuit | TB-97, -98 (OVLD/Fault): Electromagnetic relay for auxiliary
contacts |
|---|
| Type of contacts | TB-97, -98 (OVLD/Fault): Normally Open (N.O.) for auxiliary
contacts |
|---|
| Utilization category | TB-23, -24 (normal/up-to-speed), TB-33, -34 (normal/up-to-speed):
C300/R150 per UL/CSA/NEMA for Side mount auxiliary contacts |
|---|
| Rated operational current, max | TB-97, -98 (OVLD/Fault): 0.6 A @ 120V AC and 0.3 A @ 240V AC for
auxiliary contacts |
|---|
| Standard controller feature | Soft stop |
|---|
| Standard available fault current, max | 10 kA @ maximum standard fuse 400 A for delta device operational
current rating |
|---|
| Integrated motor overload protection | Yes |
|---|
| Short circuit protection device performance (SCPD) type | Type 1 |
|---|
| Selectable overload trip class | Trip Class 10, 15, or 20 |
|---|
| Selectable start times | 2, 5, 10, 15, 20, 25, or 30 s |
|---|
| Input OFF-state voltage (IN1, IN2), max | 40V AC, 17V DC/12V AC for control circuit |
|---|
| Selectable current limit | 150%, 250%, 350%, and 450% of full load current |
|---|
| Input ON-state voltage, during start (IN1, IN2) | 85V AC, 19.2V DC/19.2V AC minimum for control circuit |
|---|
| Input ON-state current (IN1, IN2) | 9.8 mA @ 120V AC/19.6 mA @ 240V AC for control circuit, 7.3 mA @
24V AC/DC for control circuit |
|---|
