Manufacturer CE certification new ozone generator 10g double
ceramic plate long life ozone parts
1. High Ozone Production Rate
High-voltage and high-frequency corona discharge, small size
transformer, low consumption rate of electricity.
2. Moisture-proof
Epoxy potting, Damp proof, Waterproof, Corrosion proof transformer.
3. Easy installation and maintenance
Structure of this ozone generator is convenient for the cleaning
and replacement of ozone plates.
4. Ultra Long Service Life
Long-life ceramic plates are made through green production on 96%
aluminum oxide ceramics, with silk-screen discharge resistance of
tungsten and molybdenum and other agents, flattened and tin-treated
on electrodes after co-firing to high temperature 1650 ℃.High
temperature co-firing electrodes and circuit its never fall off,
and are with excellent moisture and oxidation resistance.
Technical parameter
| Item | Manufacturer CE certification new ozone generator 10g double
ceramic plate long life ozone parts |
| Ozone output | 10g/hr |
| Size of ozone plate | 105*50*1.0mm |
| Dimension(L*W*H) | 5.7”*2.2”*3.0”(156*56*62mm) |
| Voltage | 110-120VAC, 220-240VAC, |
| Generating Method | Corona Discharge |
| Application | Car, RV, Outdoor, Hotel, Garage, Commercial, Household |
| Weight | 0.8KG |
Test conditions:
1. Feed Gas: Dry air or oxygen source recommendated
2. Ambient temperature: ≤10℃, Humidity: <10% (Different
temperature and humidity in the environment will affect the ozone
output and concentration.)
Application
Ozone has disinfection, sterilization, in addition to the role of
peculiar smell, at large ozone used in cold storage, granary,
factories and other large space, in small specifications of ozone
used to air purifier, refrigerator, washing machine and other
household appliances and cars.
Attention must be paid to the following:
1 Cooling method: Air cooling for transformer and ceramic plate.
2 When ozone generators work, it is necessary to have cooling fans
to blow the ceramic plates and ozone power supplies. When
installing the power supply, please make sure there is 2-3cm high
space between its bottom and the fixed board, so that heat on the
bottom of the power supply can be radiated quickly.
3 This is a high voltage product. Do not touch it when it is
working.
4 Usually after ozone sterilization, it needs 20-30 minutes to
diffuse ozone before anyone enters. And only when the ozone
concentration is or below 0.15ppm, it is permitted to enter.
