AS-ONU38 4GE+VOIP+2.4G&5.8G WIFI
Product Overview
AS-ONU38 model ONU is a user terminal device independently
developed by line with such industrial background.The device has
built-in two-layer switching function and three-layer routing
function. With compact structure and small appearance, it is a kind
of FTTH optical network unit with high performance and low power
consumption,which is very suitable for the application requirements
of various data services in FTTH networking scenarios ofvarious
operators.AS-ONU38 is an XPON product that can be adapted to EPON
and GPON networks without replacing equipment and firmware.
Features
♦ GPON:Compliance with IEEE 802.3ah & itu-t g.984.x standard
♦ GPON:8 T-CONTs,32 GEM Ports
♦ Integrate OMCI(GPON)/OAM(EPON) and TR-069 remote configuration and
maintenance
♦ Layer 3 Home Gateway/CPE features with Hardware NAT, support
Multiple WAN, Route/Bridge mode, etc
♦ Layer 2 Switching, support 802.1Q VLAN, 802.1P QOS, Bandwidth
Control, Spanning Tree, etc
♦ Bi-directional FEC
♦ Support firewall level Settings, support based on URL/MAC/ IP/
address frame filtering
♦ Support multicast IGMP v2 proxy/ snooping, support MLD proxy/
snooping
♦ Qos supports PQ, WRR, and CAR queue scheduling
♦ Provide Maximum rate 300Mbps 2.4GHz Wireless interface, and
Maximum rate 866Mbps 5.8GHz Wireless
♦ interface, 2T2R external antenna, support multiple SSID Settings
♦ Support DDSN, ALG, DMZ and UPNP
♦ Provide POTS interface, support SIP protocol,POTS integrated
circuit test complies GR-909
♦ Support 802.11ac 2x2, Wave-2 compliant with MU-MIMO
Highlights
♦ Dual band Wi-Fi, Superior performance of Wireless 11n and 11ac
Transmission
♦ Compatible with 95% Third-party OLTs (Including
Huawei/ZTE/Fiberhome/BT-PON and so on)
♦ Spport EPON/GPON mode and switch mode automatically
♦ Support Route PPPoE/DHCP/Static IP and Bridge mode
♦ Support ONU auto-discovery/Link detection/remote upgrade of
software
♦ Support IPv4/IPv6 dual mode
♦ Support Firewall function and IGMP multicast feature
♦ Support LAN IP and DHCP Server configuration
♦ Support Port Forwarding and Loop-Detect
