Corner Rounding End Mill,Carbide Corner Round End Mills,CNC
Endmills
End Mill Flutes - What Are They, and How Many Do I need?
The Spiral-shaped cutting edges on the side of the end mill are
called flutes.
Flutes provide an empty path for the cutting chips to escape from
when the end mill is rotating in a workpiece.
End Mills have either 2, 3 or 4 flutes per bit. 2 and 4 flutes are
the most popular.
2 Flute End Mills (Slot drills):
For use on wood and aluminium
Fewer flutes are best for chip evacuation, keeping the bit cooler,
but leaving a rougher surface cut.
2 flutes are best for use on Wood and aluminium as these produce
very large chips in comparison to other materials.
2 flute end mills are also referred to as slot drills.
2 flute end mills for cutting slots, profiling, routing, plunge
cutting on aluminium and wood
4 Flute End Mills:
For use on most other materials
4 flutes are used on most other materials, can cut harder materials
than 2 flutes and will create an overall smoother surface finish.
Specifications
N550 Carbide Corner Radius End mill cutter series adopt domestic
high-quality fine grain tungsten steel material, flexural strength:
4100mpa, grain size: 0.8μm. There are two categories for aluminum
and steel respectively. The internal R milling cutter for steel is
coated by imported coating equipment (black / Bronze), especially
suitable for aluminum, copper, ordinary medium and low carbon
steel, alloy steel and other materials processing. With high
precision quality control, and full inspection, all N550 series end
mills are delivered with 100% qualification rate.
| Raw Material | YL10.2 / K30 |
| WC | 90% |
| Co | 10% |
| TRS | >4100N/mm2 |
| Hardness | >91.5HRA |
| A.O.L | 50mm-75mm |
| Grain size | 0.8μm |
| Upto | HRC55 |
| Flutes No | 4F |
| Suitable for | Aluminum,plastic and other materials |
Standard Sizes
| Name | Size |
| Corner Radius End Mills/Milling cutters | φ4*50*Inner R0.5-2T/4T |
| φ4*50*Inner R0.75-2T/4T |
φ4*50*Inner R1-2T/4T |
| φ6*50*Inner R1-2T/4T |
| φ6*50*Inner R1.5-2T/4T |
| φ6*50*Inner R2-2T/4T |
| φ8*50*Inner R2.5-2T/4T |
| φ8*50*Inner R3-2T/4T |
| φ10*60*Inner R4-4T |
| φ12*60*Inner R5-4T |
| φ14*75*Inner R6-4T |
Advantages:
Excellent surface roughness thanks to Mirror Face of cutting edges.
Special flute geometry eliminates vibrations
Precise tolerance of outside diameter is applied.
Advanced Equipment
- ANCA & for producing end mills
- PG1000 & PARLEC for detecting
4.Wide Application
HRC50 suitable for Iron, Cast Iron, Common Steel under hardness
HRC45
HRC55 suitable for Iron, Cast Iron, Common Steel, Hardened Steel under hardness HRC55
HRC60 suitable for Pre-hardened steel; Stainless steel; Alloy
steel; Die steel under HRC60
HRC65 suitable for Hardened steel; Mold steel; Die steel; Alloy
steel above HRC60
