10S13C Automotive Air Conditioning Compressor For VW POLO For
T-Cross 1.5 WXVW062
Parameter:
Model Number
| WXVW062 |
Car Model
| For VW POLO For T-Cross 1.5 |
Type
| VW AC Compressor |
Compressor type
| 10S13C 6PK |
OE NO.
| N/A |
Working Principle
The basic working principle of the automobile air conditioning
compressor is to suck low-pressure cold gas (usually refrigerant)
into the compressor cavity through the driving device, and then
compress it into high-pressure and high-temperature gas.
Compressors usually use piston or screw compressors. In a piston
compressor, the piston moves up and down in the cavity, and the
cold gas is compressed by the movement of the piston. In a screw
compressor, the screw compresses the cold gas.
The compression process of the compressor increases the pressure
and temperature of the cold gas. The high-pressure and
high-temperature gas will then enter the condenser and be converted
into high-pressure hot gas through heat dissipation, then cool and
expand through the expansion valve, and finally enter the
evaporator to prepare for circulation again.
Throughout the process, the compressor provides compression and conversion capabilities and is one of the key
components to realize the automotive air conditioning refrigeration
cycle.
Find Problem
1.Inspect air flow problems: If you're experiencing insufficient
air flow from your vents, ensure that there are no blockages. Your
cabin air filter might be dirty or completely obstructed. While the
engine air filter is well-known, the cabin air filter can also
impede air flow. Another potential cause is a malfunctioning blower
motor. Before jumping to replace the AC compressors, always check
the fuse box for air flow issues.
2.Conduct a comprehensive check: If you're unsure about the problem
with your AC system, perform a thorough inspection. This is a
cost-effective method that could save you money in the long term.
Start by turning on your car's AC and eliminate any other
distracting noises. Listen for any abnormal sounds from behind the
console panel or within the engine. Additionally, assess the
cooling efficiency of the AC. Look out for unusual odors as well,
as they could indicate faulty components or blown fuses. Therefore,
it's important to inspect the fuses too.
3.Monitor your AC's temperature: Similar to measuring internal body
temperature with a thermometer during a fever, diagnosing potential
issues with your car's AC compressor requires checking its
temperature. Specifically, pay attention to the AC compressor
clutch. While the AC is running, locate the compressor and identify
the clutch, which appears as a small circular gear responsible for
engaging the compressor belt. If the AC compressor clutch remains
still despite the AC running, it indicates a problem with the
compressor. You can try adjusting the belt tension or opt for a
complete replacement of the AC compressor.
4.Detect refrigerant leaks: Just like a closed brake system in your
car, any leaks in the AC system can have a detrimental impact. This
can result in temperature fluctuations or even complete failure of
the system. Although refrigerant leaks can sometimes be caused by a
faulty AC compressor, it is not always the case. AC compressors,
like any other car part, can eventually fail. While some are
manufactured with the highest quality standards and rarely require
replacement, most AC compressors will eventually fail.
WNRLN Packing
ß ß ßWeixing’s packaging and shock-proof foams, which have
protective functions.
Their thickness is thicker than ordinary box and foam , Relatively
speaking, the quality of Weixing’s packaging is better than that of
ordinary packaging.
ß ß ß It has the advantages of good stiffness and high wear
resistance.
It is deeply loved by domestic and foreign customers.
