Introduction:
A typical Constantan alloy composition is 55% copper, 45% nickel.
According to different application requirements, a small amount of
other elements such as iron and manganese can be added to improve
its performance.
Constantan is widely used in manufacturing temperature sensors,
thermocouples, precision resistors, and power supplies.
Application:
Temperature measurement sensor: Constantan tape is often used to manufacture thermocouples and
thermal resistors due to its good temperature coefficient, which
can accurately measure temperature changes.
Resistance and current measurement: Constantan tape has stable resistance value and can be used as a
precision resistor for current and voltage measurement.
Power supply and electronic equipment: Constantan tape has good conductivity and can be used to
manufacture power cords, batteries and other electronic components.
Heat exchanger: Constantan tape is corrosion-resistant and is often used in the
manufacture of heat exchange equipment, such as heat exchange tubes
in refrigeration systems.
Instrument manufacturing: Due to its good properties, constantan is also widely used in
instrument manufacturing, such as pointers, measuring rings, etc.
Advantage:
Thermoelectric properties: Constantan has a high Seebeck coefficient, which is the ability to
generate a thermoelectric voltage when subjected to a temperature
difference. This property is utilized in thermocouples, where a
constantan wire is paired with another metal, such as iron or
chromel, to create a temperature-sensing device.
Corrosion resistance: Constantan exhibits good corrosion resistance, especially to
oxidation, making it suitable for use in environments where the
material may be exposed to moisture, chemicals, or other corrosive
agents.
Mechanical properties: Constantan has relatively high strength and durability, making it
suitable for applications where the material needs to withstand
mechanical stress or vibration.
Electrical resistance: Constantan has a relatively high electrical resistance compared to
pure metals like copper. This makes it useful for applications
where a specific resistance value is required, such as in resistors
or resistance temperature detectors (RTDs).
Temperature coefficient of resistance (TCR): Constantan has a very low TCR, meaning its electrical resistance
changes only slightly with temperature variations. This makes it
suitable for use in precision measurement and control applications
where temperature stability is important.
Parameter:
Main Chemical composition (%)
| NC050 CuNi44 | Copper | Nickel | Manganese |
| Chemical | balance | 44% | 1~1.5% |
Physical Parameters:
| Type | Resistivity
(μΩ.m20°C) | Max working temperature
(°C) | Tensile strength
(Mpa) | Melting point
(°C) | Density
(g/cm) | TCR
(x10-6/°C)
(20~600°C) | EMF vs Cu
uV/°C
(0~100°C) | Elongation
(%) |
| CuNi44 | 0.5 | 400 | 420 | 1200 | 8.9 | ＜-6 | -43 | 25% |
Type of product:
| Type | Size(mm) | others |
| Round wire | 0.1~8mm | Customized |
| Flat ribbon wire | W-0.5~5mm | T-0.1~3mm |
| Strip/foil | W-6~250mm | T-0.1~3mm |
| Rod | 8~200mm |
