Large Size Plate Making Machine, Model: Ecoosetter VLF T-1600S
EcooGraphix VLF(Very Large Format) Thermal CTP Machine T-1600M can
be used for B0 paper size Posters or wall charts, Large Books,
Catalogue, Yellow pages, Packaging processing, and Plate-making
centers, etc., with the output speed of 14 plates per hour.
Product Highlights:
1) Superior dot quality reproduction proved by the worldwide
market:
1%-99% dot reproduction; Up to 250lpi screening, 2400 dpi or
1200dpi optional
2) Fully qualified:
for any thermal non-process plate and process plates.
3) Robustness and simplicity:
robust machine and easy to use. User-friendly and simple design to
avoid human error.
4) Worldwide top-class components and parts supplied by
internationally well-known suppliers from Japan, USA, and Germany.
5) Long lifetime and warranty of parts:
laser diodes lifetime at more than 10,000 imaging hours.
(Approximately 20,0000 plates)
6) Long warranty of the machine:
3 years warranty (free replacement of all parts)
Low Cost of Parts: after 3 years' warranty, very low cost of parts.
for example, a laser diode at US$250 per piece.
7) Guaranteed Service:
Installation and training will be conducted by a technical engineer
from the factory to ensure optimal setup and effective training.
Regular remote maintenance will be performed every two months.
Engineers will proactively revisit the site as needed. 24/7 service
response is available."
This revision smooths out the phrasing while maintaining the
intended meaning and flow
Specification:
| Model | T-1600S | T-1600SX |
| Imaging System | 64 channel | 256 channel |
| Output Speed | 16 pph | 25 pph |
| 1470mm x 1180mm / 2400dpi |
| Plate Size | Max.1470 x 1180mm Min. 300mm x 400mm |
| Plate Thickness | 0.15mm-0.40mm or 0.25mm-0.4mm ( Alternative) |
| Resolution | 2400dpi |
| Weight | 1400KG |
| Repeatability | ±5μm
(continuous exposing for 4 times or above on the same plate
with a temperature of 23ºC and humidity of 60%) |
| Machine Size | 2355*1910*1217mm(W*D*H) |
| Power Supply | Single-phase:220AV-240AC; Powder Consumption: 5.5KW |
| Environment | recommended: 21-25ºC, Allowed temperature:15-30ºC, Humidity:
<70%RH |
