DTII Type Belt Conveyor Roller Conveyor Belt Drive Roller Heavy
Duty Conveyor Belt Rollers
Belt Driven Roller Overview:
DTII Type Conveyor Belt Drive Rollers are divided into three types: light, medium and heavy according to
the load-bearing capacity. The diameters of the rollers are 500,
630, 800 and 1000mm. The same type of roller has several different
shaft diameters and center spans for selection.
1) Lightweight: The bearing hole diameter is 80~100mm, the shaft
and the hub are connected by a single key, the drum is a
single-width plate welded structure, and the shaft comes out in one
direction.
2) Medium type: The bearing hole diameter is 120~180mm, the shaft
and the hub are connected by expansion sleeves, and there are two
types of one-way shaft output and two-way shaft output.
3) Heavy duty: The bearing hole diameter is 200~220mm, and the
expansion sleeve connection is a cast-welded cylinder structure.
Belt Conveyor Carrier Roller Advantage:
1. Easy installation ,stable operation ,good flexibility and min
30,000 hours stable lift time.
2. High accurate steel pipes ensure the rollers with wearing
resisting,low vibration and noise.
3. Sealing arrangement include a double seal.
4. Dustproof, waterproof and anti-alkali and acid suitabe for
corrosion environment.
5. Electrostatic spraying technical makes the roller more durable
and good-looking.
Gravity Puller Roller Parameter:
| Type | Diameter | Bearing Bore Diameter |
| Light | 500mm630mm | 80～100mm |
| Medium | 800mm | 120～180mm |
| Heavy | 1000mm | 200～220mm |
Belt Conveyor Roller Image:
