CE certificate fully automatic capsule tablet medical blister
packaging
Introduction:
Medical blister packaging has the advantages of extending the
retention period, beautifying the product, and reducing packaging
costs. Because the machine occupies a small area, low investment,
multi-functional use, high efficiency, no pollution, and low noise,
it is an ideal packaging equipment for purifying workshops and
hospital reagent rooms.
Features of CE certificate fully automatic capsule tablet medical blister
packaging:
1. Use domestic high-power transmission mechanism is adopted, and
the main rotating shaft is driven by the chain, eliminating the
errors and noise of other gear transmissions;
2. The appliance adopts an imported control system, which can be
configured with missing material missing and missing device and
missing particle detection and removal device according to customer
requirements;
3. The whole machine adopts segmented combination: PVC forming,
feeding, heat sealing is one segment, and tropical aluminum cold
forming, heat sealing, and punching are divided into one segment
for split packaging;
4.Using photoelectric control system, PVC, PTP, rigid aluminum
packaging automatic feeding, waste edge automatic punching device
to ensure the long-distance multi-station synchronization
stability;
5. Can be equipped with additional photoelectric detection and
correction device, imported stepper motor traction, graphic and
text printing and packaging to optimize the packaging grade;
6. This pharma blister packaging machine is suitable for:
blister-sealed packaging of sugar-coated candy, gel pills,
injections, special shapes, etc., as well as medical equipment,
light food, and electronic components.
Main Parameter of CE certificate fully automatic capsule tablet medical blister
packaging:
| Punching frequency: 10-40 times/min, 2400plate/hour |
| Normal section: 57*80mm | Specification: 27*80mm one plate per time |
| Max forming area: 80*110*26mm | 60*100mm one plate per time |
| The feed stroke range: 20-70mm | |
| Yield rate: more than 99% | Motor power: 0.75kw |
| Forming heating power: 0.9kw | Low heating power: 0.9kw |
| Heat sealing power: 0.8kw | Gas mercury passenger volume: more than 0.3m3 |
| Cooling: circulating water or tap water | Weight: 450kg |
| Dimension: 1740*590*1190mm | |
| Packing material: Medicinal PVC 0.3*80MM Aluminum foil 0.023*80mm |
Detail Shows of CE certificate fully automatic capsule tablet medical blister
packaging:
Real Photos of CE certificate fully automatic capsule tablet medical blister
packaging:
Application of CE certificate fully automatic capsule tablet medical blister
packaging:
Installation and precautions of CE certificate fully automatic capsule tablet medical blister
packaging:
1. Check whether the ground level is balanced before installation.
2. The ground wire should be connected at the location specified on
the grounding label.
3. Full-time personnel training operation and maintenance.
4. The machine should be kept clean and tidy.
5. All parts of the machine must be refueled before production
(refer to the operating provisions)
6. When the machine leaves the factory, the gearbox strap
lubricating oil must be refueled before production.
7. It is recommended to use oil-free air compressor for this
machine.
8. The pressure of forming, heat sealing, indentation and other
parts should not be too high, otherwise it will affect the service
life. There should be a floating margin of about one millimeter for
the forming and indentation of the pad.
Pharmacy Process of CE certificate fully automatic capsule tablet medical blister
packaging:
