YB13SC upgraded version of MDI CAN instrument 1.3inch Displays the
current vehicle speed, in Km/h.
Product Description:
YB13S is an upgraded version of MDI CAN instrument, which is
compatible with DALA MDI CAN series instruments and can be
customized with hardware and software according to customers'
needs.
This series vehicle instrument is based on CAN communication,
displays vehicle speed, power, hour meter, speed mode, fault code
and other information by communicating with the vehicle, and has
the advantages of timely communication, real-time display, and high
visualization.
The meter is connected to the controller via a simple wiring
harness, with no necessarity to connect with battery. Such a simple
connection reduces both the cost of the wiring harness and the
installation time.
CAN Interface Description
YB13S has a one-way CAN bus interface that allows it to work with
other electrical devices in the same CAN bus network and exchange
information with other electrical devices via the CAN bus.
A termination resistor is built in the instrument, i.e. there is a
120Ω resistor between CANH and CANL (A5 and A6 are shorted).
Therefore the instrument can be used as a terminal module in a CAN
network.
Note: If YB13S does not receive CAN message for a certain period of
time, it will display the fault "NO CAN MASSAGE", and when CAN
message is received again, the fault will disappear.
Overall
The outlook design is beautiful and elegant, with unique and
eye-catching operating instructions and alarm icons. The LED
warning lighting on the front outer ring sends a clear signal of
vehicle status to the driver; The fault code prompts will indicate
the sources of the faults (traction, pump, steering), analyze the
causes of the faults, and solve the problems timely and
efficiently; thus high efficient human-computer interaction can be
achieved by feeding the driver about visual information including
current speed, hour meter, BDI, operating mode and others.
Interface Instructions
| icons | Descriptions |
|---|
| BDI | Displays the remaining battery charge, when the battery is low, the
BDI icon bar is in red color. |
| Fault Code | Display the fault code of the current fault node (controller), when
multiple faults occur, the fault codes will be displayed cyclically
with an interval of 1s. |
| Performance Mode | Turtle icon indicates low-speed mode. |
| Service Mode | When a system fault is detected, the service icon appears along
with the fault code and the LED alarm light is red. |
| Hour Meter | The digits indicates the current vehicle's cumulative power-on
time, in h. |
| Alarm Light | The alarm light is green at normal, it will turn red when a system
failure is detected. |
| Speedometer | Displays the current vehicle speed, in Km/h. |
