Indumax CLS50 measures toroidal conductivity in:
Chemicals:
- Concentration measurement of acids and bases
- Quality monitoring of chemical products in tanks and pipes
Food & beverages:
- Phase separation of product/product mixtures in pipe systems
Wastewater industry:
- Inlet monitoring
With its international explosion protection approvals, such as
ATEX, FM, CSA, NEPSI, it is suitable for hazardous areas.
Measuring principle | Inductive |
Characteristic |
Inductive conductivity cell made of highly resistant material for
conductivity and concentration neasurements in process
applications.
|
Measurement range | 2µS/cm - 2000 mS/cm |
Measuring principle |
Inductive conductivity measurement
|
Design |
- No direct contact with the media because of the sensor coating
made of highly resistant material.
|
Material | PEEK or PFA |
Dimension | Electrode: outside diameter: appr. 47 mm inside diameter: appr. 15
mm |
Process temperature |
max. 180°C (PEEK)
(356°F)max. 125°C (PFA)
(254°F)
|
Process pressure | max. 20 bar (PEEK)
(290 psi) max. 16 bar (PFA)
(233 psi) |
Temperature sensor | Integrated Pt100 |
Ex certification |
ATEX
|
Connection | Process connection: NPT1", DN50, AINSI, JIScable: fixed cable
connection. |
Ingress protection |
IP67
|
Additional certifications |
Calibration certification of the cell constant.
|
