0.6/1 KV XLPE Insulated Cable Triplex Service Drop Aluminum Conductor

0.6/1 KV XLPE Insulated Cable Triplex Service Drop Aluminum Conductor

0.6/1 KV XLPE Insulated Cable Triplex Service Drop Aluminum Conductor

Triplex aluminum conductor cables: The triple center cable provides control dispersion for high voltage (HV) mains in mechanical and utility applications. Note that the red external sheath is prone to blurring when exposed to UV radiation, if that's not too much bother. Znergycable products outlast UL 1426, ABYC, and US Coast Guard Charter pontoon (CFR Title 46) models in terms of durability and ease of use. They are made of quality vinyl protection, tested at 600 volts, 105 degrees Celsius dry and 75 degrees Celsius wet. It can withstand extreme cold (-40 degrees Fahrenheit or Celsius) and protects against ultraviolet radiation, salt water, sulfuric acid, oil, gasoline, warmth, scratched surfaces, and fuel. Type 3 tinned copper stranding, which is of the highest quality and most versatile, provides the best protection against

*Applications:

To supply 120 volt aerial service for temporary service at construction sites, outdoor or street lighting. For service at 600 volt
or lower at a conductor temperature of 75℃ maximum.

Nominal cross section	Neutral core			Phase core			weight (kg/km)	Allowable ampacity (A)
	AAC		LBS	AAC		Insulation thickness(mm)		XLPE	PE
	NO	diameter (mm)		NO	diameter(mm)
1*6AWG+1*6AWG	7	1.56	563	1	4.11	1.14	92	85	70
1*6AWG+1*6AWG	7	1.56	563	7	1.56	1.14	94	85	70
1*4AWG+1*4AWG	7	1.96	881	1	5.19	1.14	139	115	90
1*4AWG+1*4AWG	7	1.96	881	7	1.96	1.14	141	115	90
1*2AWG+1*2AWG	7	2.47	1350	7	2.47	1.14	216	150	120
1*1/0AWG+1*1/0AWG	7	3.12	1990	19	1.89	1.52	347	205	160

TRIPLEXSERVICEDROP-ALUMINUM CONDUCTOR:

*Applications:

To supply power from the utility's lines to the consumer's weatherhead. For service at 600 volt or less (phase to phase) at a conductor temperature of75℃ maximum for polyethylene insulation or 90℃ maximum for crosslinked insulation.

AWG or kcmil	Bare Neutral Messenger			Phase Conductor			Weight kg/km	Allowable Ampacities(A)
	AAC		Rated Strength lbs.	AAC		Insul. Thick. mm		XLPE	PE
	NO.	Dia.mm		NO.	Dia.mm
2*6AWG+1*6AWG	7	1.56	563	1	4.11	1.14	146	85	70
2*6AWG+1*6AWG	7	1.56	563	7	1.56	1.14	150	85	70
2*4AWG+1*4AWG	7	1.96	881	1	5.19	1.14	219	115	90
2*4AWG+1*4AWG	7	1.96	881	7	1.96	1.14	224	115	90
2*2AWG+1*2AWG	7	2.47	1350	7	2.47	1.14	338	150	120
2*1/0AWG+1*1/0AWG	7	3.12	1990	7	3.12	1.52	544	205	160
2*1/0AWG+1*1/0AWG	7	3.12	1990	19	1.89	1.52	545	205	160
2*2/0AWG+l*2/0AWG	7	3.5	2510	7	3.5	1.52	671	235	185
2*3/0AWG+l*3/0AWG	19	2.39	3310	19	2.39	1.52	830	275	215
2*4/0AWG+l*4/0AWG	19	3.25	4020	19	3.25	1.52	1476	315	245
2*336.4+1*336.4	19	3.38	6146	19	3.38	2.03	1649	420	325

Luoyang Sanwu Cable Co., Ltd.,