Rechargeable Lithium Ion Polymer 602040 3.7v 450mah 400mAh Lipo Battery For Wireless Headset

Product Advantage

1. Shape, dimension, voltage, capacity and current can be customized

2. Light weight, high density, safety and long life cycle

3. Protection pcb board, cable and connector are included

4. Low self-discharge rate

5. Eco-friendly

Product Description for Rechargeable 602040 3.7v 450mah lipo battery for wireless headset

1.Model:AUK602040
2.Voltage:3.7v
3:Capacity:460mAh
4.Weight:9.50g

5.Dimention: 6.2*21*42.5mm

Parameter Table:

Item			Rating	Note
3.1 Capacity		Typical	460mAh	Discharge:0.2CmA cut off Voltage:3.0V for cell
		Minimum	400mAh
3.2 Nominal Voltage			Average 3.7V	Discharge:0.2CmA cut off Voltage:3.0V for cell
3.3 AC Impedance Resistance			≤160mΩ
3.4 Discharge Cut-off Voltage			3.00V
3.5 Charge Current			90.0 mA	Standard Charge
3.6 Charge Voltage			4.2V
3.7 Max. Charge Voltage			4.23V
3.8 Storage humidity			< 75%RH	Hygrometer
3.9 Max. Charge Current			650mA	1.0CmA
3.10 Max. Discharge Current			650mA	1.0 CmA
3.11 Weight			Approx 9.5g
3.12 Operating Temperature	Charge		0~+45°C
	Discharge		-20~+60°C
3.13 Storage Temperature	less than 1 month		-20~+45°C	Recommended storage temperature: 20°C,at the shipment state

Precautions:

1. Before using this product, be sure to read the product manual in detail, and operate correctly according to the instructions in the manual.

2. Do not disassemble the device by yourself. This product is not equipped with any parts that can be disassembled/repaired by yourself.

3. It is strictly forbidden to make the product object or heat source contact. It is strictly forbidden to throw this product into fire or water, and it is strictly forbidden to charge the mobile power in an environment below 0°C.

4. Do not vibrate, knock or impact this product violently. If the product encounters strong impact, strong extrusion, or falls from a high place, causing the shell to deform or bulge, please stop using the product.

5. Do not expose this product to sunlight, do not place this product in an environment with corrosive substances, and do not use other chemical solutions to clean this product.

6. If the product is abnormally hot or leaks, please stop using it immediately. If the liquid accidentally splashes into the eyes, do not rub the eyes, rinse the eyes with clean water immediately, and seek medical attention immediately if it is serious.

7. In order to avoid abnormality of this product, it is recommended to use the charging cable, adapter and power supply device produced by the original factory.

8. Please dispose of waste mobile power according to national environmental protection regulations

9. Please keep this product out of the reach of children.

AUK Other Hot Selling Lithium Polymer Battery Model for your Choose

HUNAN AUK NEW ENERGY CO., LTD is a comprehensive battery of R&D, design, production and processing as one of high quality battery manufacturer. The company has a number of more than twenty years specializing in R&D lithium polymer battery protection areas. Adopting new technology and new facility to produce Li-ion polymer battery in high power, high voltage, wide temperature range of battery design, battery assembly design has its own unique technical ideas, and achieve the success of many customers at home and abroad to solve a variety of special purpose battery demand.

Our production capacity reaches 100,000pcs daily production of polymer battery cells, 200,000pcs daily production of aluminum shell battery cells and 100,000pcs of ends product battery pack.Our battery has character of big capacity, good safety and long cycle life. We have successively obtained CE, RoHS, MSDS, UL, CB/IEC62133, KC, ISO and UN38.3 Certifications.

We always insist “ treat others integrity to establish the credit enterprise ” .

With its attitude to pursuit excellence, is creating a new energy era of perfect quality, leading Chinese lithium polymer battery industry and turning itself into a world-class battery company.Only customer’s success is our success!