Product Description:
Salt Spray Test Chamber (New)
Specimen holder: The basket holder of the laboratory adopts the plane dividing
frame, with optional placement angles of 15 degrees and 30 degrees.
The fog on all sides and the fog direction is completely
consistent.
Equipment design principle: This series of equipment is designed to simulate the atmosphere
salt droplets diffusion system and is widely used in electronics,
electrician, automobile, motorcycle, hardware, plastic, FPC soft
board, and other industry products. It is used to conduct salt
spray corrosion tests on products after electroplating, spray
paint, paint, and anode treatment to evaluate their surface
corrosion resistance.
Application: The salt spray corrosion resistance testing chamber is widely used
in various industries, such as electronics, electrician,
automobile, motorcycle, hardware, plastic, FPC soft board, and
others. It is used to conduct salt spray corrosion tests on
products after electroplating, spray paint, paint, and anode
treatment to evaluate their surface corrosion resistance.
Temperature range: The temperature range of this equipment is RT+5℃~60℃.
Box structure:
- Test room and outer boxes: The inner and outer boxes of the laboratory are made of grade PVC
polyethylene board with a thickness of 8mm. They are resistant to
acid, base, and temperature up to 78℃.
- Laboratory sealing cover: The laboratory sealing cover is made of class PVC plate with a
thickness of 8mm and a surround reinforcement of 13mm. It is also
resistant to acid, alkali, and temperature up to 78℃.
This salt spray corrosion resistance testing chamber, also known as
an environmental salt spraying tester, is essential for evaluating
the surface corrosion resistance of various products. With its
precise and reliable testing capabilities, it helps ensure the
quality and durability of products in harsh environments. Trust our
salt fog spray test chamber to provide accurate and efficient
testing results for your products.
| Model | I E4460L | I E4490L | I E44120L | I E44160L | I E44200L |
| Laboratory temperature range | RT+5℃~60℃ |
| Pressure barrel temperature range | RT+5℃~70℃ |
| Temperature fluctuation | ±0.5℃ |
| Temperature uniformity | ≦1.0℃ |
| Salt mist settlement | 1～3ml/h.80cm2 |
| Spray pressure | 1.00±0.01kgf/cm² |
| Spray way | Continuous spray + intermittent spray |
| Valid test capacity | 150L | 270L | 576L | 800L | 1200L |
| Internal box size:WxHxD(mm ) | 600*450*400 | 900*600*500 | 1200*800*600 | 1600*1000*500 | 2000*1000*600 |
| Out box size:WxHxD(mm ) | 1050*700*950 | 1400*850*1100 | 2080*1050*1300 | 2430*1250*1400 | 2730*1250*1400 |
| Box structure | ● Test room and outer boxes: the inner and outer boxes of the
laboratory adopt A grade PVC polyethylene board, the thickness of
the whole machine is 8mm, acid and base resistance and temperature
resistance to 78℃. ● Laboratory sealing cover: laboratory sealing cover adopts A class
PVC plate, thickness of 8mm, surround reinforcement of 13mm, acid
and alkali resistance and temperature resistance of 78℃ |
| Open cover way | Manual open cover | One-click automatic open-cover |
| Water filling method | Automatic / manual dual water supply mode, automatic water inlet
with a set of water purifier |
| Specimen holder | The basket holder of the laboratory adopts the plane dividing
frame, the placement Angle of 15 degrees and 30 degrees is
optional, and the fog on all sides and the fog direction is
completely consistent. |
| Safety protection device | ● When low brine, automatically cut off the heater power supply. ● Over-temperature, automatically cut off the heater power supply. ● When the laboratory is at low water level, automatically cut off
the heater power supply. |
| Power | AC220V;50Hz;1.5KW | AC 220;V50Hz;2.5KW | AC 220;V50Hz;3.5KW | AC 220;V50Hz;4.5KW | AC 380;V50Hz;5KW |
Applications:
Infinity IE 44 Series Salt Spray Test Chamber (New)
Product Description
The Infinity IE 44 Series Salt Spray Test Chamber is a high-quality
testing equipment designed for salt spray corrosion testing. It is
commonly used in various industries such as electrical, electronic,
and light industry products to evaluate the corrosion resistance of
materials and coatings.
Brand Name
INFINITY
Model Number
IE 44 Series
Place of Origin
MADE IN CHINA
Certification
CE, ISO
Minimum Order Quantity
1 set
Price
Negotiate
Packaging Details
Clear sheet+sponge+wood carton
Delivery Time
20-30 days after order confirmed
Payment Terms
TT, PAYPAL, Moneygram and more
Supply Ability
200 sets / month
Product Features
- Salt spray corrosion test chamber
- Salt spray corrosion testing equipment
- Salt spray chamber with fog collector
- Salt spray testing machine
- Salt spray corrosion test equipment
Specimen Holder
The Basket Holder of the laboratory adopts the plane dividing
frame, with optional placement angles of 15 degrees and 30 degrees.
The fog on all sides is consistent and the fog direction is
completely consistent for accurate and reliable test results.
Open Cover Way
The salt spray test chamber has two ways of opening the cover -
manual open cover and one-click automatic open cover. The manual
open cover allows for more control and flexibility while the
automatic open cover provides convenience and efficiency.
Test Standards
The Infinity IE 44 Series Salt Spray Test Chamber meets the
following test standards:
- GB / T242317-2008 - Basic Procedure Test Ka for Electrical and
Electronic Products
- GB / T242318-2000 - Basic Procedure Test Ka for Electrical and
Electronic Products
- GB / T10125-1997 - Artificial Atmosphere Corrosion Test Salt Spray
Test Technical Conditions
- GB / T10587-2006 - Salt Spray Test Box
- GB105932-1990 - Environmental Parameter Measurement Method of
Electrical and Electronic Products
- GB / T1765-1979 - Test of Damp Heat Resistance, Salt Spray
Resistance and Hou Resistance (Artificial Acceleration)
- GB / T242317-1993 - Basic Environmental Test Procedures for
Electronic and Electrical Products Test Ka: Test Methods for Salt
Fog
- GB / T1771-2007 - Determination of Paint and Varnish Resistance for
Neutral Salt Spray Test (NSS Test)
- GB5938-86 - Test Method for Metal Plating and Chemical Treatment of
Light Industry Products
- GB / T1771-91 - Measurement of Paint and Varnish. Acetate Fog Test
(AASS Test)
Valid Test Capacity
| Model | Valid Test Capacity |
|---|
| IE 44 Series | 150L |
| IE 45 Series | 270L |
| IE 46 Series | 576L |
| IE 47 Series | 800L |
| IE 48 Series | 1200L |
Special Features
- The test drug supplement is hidden, without opening the cover and
filling.
- The side has the water level observation window for convenient
cleaning.
- Using special glass nozzle and spray water pipe with saline filter
for 4000 hours of continuous use without crystalline salt
obstruction.
- Control components choose well-known brands for reliable and stable
performance.
- Upper and lower water and electricity separation structure to avoid
safety risks and prevent circuit corrosion and aging.
- Maximize the service life of electrical components and make
maintenance more convenient.
- The new version has hydropower up and down independent separation
for different installation requirements.
- Can be manually or automatically add water according to the
customer's installation place.
- Continuous spray and intermittent spray can be quickly and freely
switched for easy operation.
Customization:
Customization Service for Salt Spray Test Chamber (New)
Brand Name: INFINITY
Model Number: IE 44 Series
Place of Origin: MADE IN CHINA
Certification: CE, ISO
Minimum Order Quantity: 1
Price: Negotiate
Packaging Details: Clear sheet+sponge+wood carton
Delivery Time: 20-30 days after order confirmed
Payment Terms: TT, PAYPAL, Moneygram and so on
Supply Ability: 200 sets / month
Equipment Design Principle: This series of equipment is designed to simulate the atmosphere
salt droplets diffusion system, and is widely used in electronics,
electrician, automobile, motorcycle, hardware, plastic, FPC soft
board, and other industry products after electroplating, spray
paint, paint, anode treatment for salt spray corrosion test, in
order to evaluate its surface corrosion resistance.
Box Structure:
- Test Room and Outer Boxes: The inner and outer boxes of the laboratory adopt Grade PVC
polyethylene board with a thickness of 8mm, providing resistance to
acid, base, and temperatures up to 78℃.
- Laboratory Sealing Cover: The laboratory sealing cover is made of Class PVC plate with a
thickness of 8mm and reinforcement of 13mm, providing resistance to
acid, alkali, and temperatures up to 78℃.
Temperature Fluctuation: ±0.5℃
Spray Way: Continuous spray + intermittent spray
Temperature Uniformity: ≦1.0℃
Key Features: Salt spray chamber with fog collector, environmental salt spraying
tester, salt spray corrosion test chamber.
Packing and Shipping:
Packaging and Shipping:- The salt spray test chamber (new) will be packed in a strong wooden
case to ensure safe transportation.
- Each unit will be securely wrapped with foam and plastic film to
prevent any damages during shipping.
- The wooden case will be marked with the product name, model number,
and any other necessary information for easy identification.
- The package will be shipped via a reliable international courier
service, ensuring timely and safe delivery.
