PLC Control Auto Feeding PCB Separator with ESD Transporting Belt
Introduction
This machine is a manual board loading machine automtic feeding
balde moving separating machine, the main feature is the adopt the
PLC control, using the motor to drive the boards to achieve
automatic feeding, when the boards arrive the separating side, the
inductor will send a signal to the PLC, so it will give a order to
the balde, then the blade will move and start for depaneling. It's
a more efficienct separator than the manual feeding V-Cut PCB
separator, which can save much more boards feeding time, also the
machine equipped with the ESD transporting belt, so the operator
just wait for collecting the boards after separating.
Features
1, PLC control to achieve the automatic board loading.
2, Manual board loading, autoamtic board feeding.
3, Inductor send signal to the PLC to order the blade moving for
separating.
4, Save the trouble for manual V-cut groove feeding, increase the
efficiency, avoid mistakes for manual V groove location.
5, The machine equipped with a automatic ESD transport belt, it
will transoport the boards to the production line automatically
after separating.
6, The PCB or thin plate without v-grooved can customized tray and
prevent stay positioning device.
Specification
| Product name | Auto feeding blade moving PCB separator |
| Model | HS-F306 |
| Part-up height | Max 35mm |
| Part-down height | Max 20mm |
| Air supply | 0.6-0.8Mpa |
| Output | 12.5tons(gross) |
| Voltage | AC220V/110V,50/60Hz |
| Separating width | 50~230mm |
| Blade material | Import high quality high speed steel tool |
| Separating speed | 1-300mm/s |
| V-cut thickness | 0.3-3.5mm |
| Machine size | 700*650*620mm |
| Weight | 86kg |
Application boards
