BP93420-III Pressure Transmitter
Introduction of industrial pressure transmitter sensor :
The BP93420-III Industrial pressure sensor transmitter features a
stainless steel pressure core and miniature amplifier processing
circuit. The zero range is adjustable, and the installation
interface can be customized to meet user requirements.
Additionally, it offers compatibility with other brands of
transmitters. This series of products is widely utilized in
industrial process control, hydraulic equipment, chemical industry,
and other sectors where harsh environmental conditions are
prevalent.
Product Features of industrial pressure transmitter sensor:
1. Wide measuring range, diverse pressure interface forms.
2. IP65 protection level.
3. Various output signal forms.
Applications of industrial pressure transmitter sensor:
1. Suitable for measuring the pressure of non-corrosive gases and
liquids in 316L stainless steel.
2. Petroleum, chemical, metallurgy, power, and hydrology.
3. Pressure measurement and control in harsh outdoor industrial
environments.
4. Used in hydraulic and pneumatic control systems.
| Performance Parameters of 2088 pressure transmitter sensor |
| Measurement Range | -100kPa…0kPa ~10kPa…40MPa |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability | ≤±0.1%FS |
| Hysteresis | ≤±0.1%FS |
| Long-Term Stability | ±0.1%F.S/Year(Typical) ±0.2%F.S/Year(Maximum |
| Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Frequency Response | 2.4Khz |
| Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | Cast aluminum |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Explosion-proof Rating | Ex ia IIC T6 Ga |
| Protection Rating | IP65 |
| O-Ring Seal | Fluoro rubber |
| Weight | ~1.2kg |
1. When selecting a product, please ensure that the medium under
test is compatible with the contact part of the product.
2. When ordering a transmitter with LCD or LED display head, the
power supply of the transmitter should not be lower than 12VDC.
3. In order to ensure the reliable operation of the product, it is
recommended to install lightning protection device on site and
ensure the reliable grounding of the product and the power supply.
4. The default cable does not come with cable. If necessary, please
communicate with the salesman in advance.
5. In case of strong vibration, instantaneous wallop, strong
electromagnetic or radio frequency interference and other special
requirements, please let us know and indicate in the order.
| Order Guide |
| BP93420XX | Pressure Transmitter |
| Code | Outline Construction |
| IB | General Pressure Transmitter | IX | Display Pressure Transmitter |
| IE | Shock-resistant Aviation Pressure Transmitter | IIC/III | Industrial General/ Display Pressure Transmitter |
| IF | Moisture-proof Pressure Transmitter | IIE/IIIE | General/Display Pressure Transmitter |
| IN | Air Conditioning Dedicated Pressure Transmitter | | |
| IC | High-temperature Pressure Transmitter | | |
| IQ/IQT | Large Diaphragm /High-temperature Pressure Transmitter | | |
| Measurement Range | -100kPa…0kPa ~ 35kPa…3.5MPa |
| (0-X)Kpa or MPa | X: Indicates the Actual Measuring Range |
| Code | Power Supply |
| D1 | 24VDC |
| D2 | 5VDC |
| D3 | Other |
| Code | Output Signal |
| S1 | 4~20mADC | S5 | 0~20mADC |
| S2 | 1~5VDC | S6 | 0~10VDC |
| S3 | 0~5VDC | S7 | 0.5~4.5VDC |
| S4 | 0~10mADC | | |
| Code | Pressure Connection |
| J1 | M20×1.5 |
| J2 | G1/2 |
| J3 | G1/4 |
| J4 | 7/16-20UNF |
| J5 | Other |
| Code | Electrical Connection |
| B1 | Hirschmann |
| B2 | PG7 Plug |
| B3 | Sealed Cable Output |
| B4 | 2088 Industrial Casing |
| B5 | 2088 Industrial Casing with Display |
| B6 | Other |
| Code | Pressure Type |
| G | Gauge Pressure |
| A | Absolute Pressure |
| S | Sealed Reference Pressure |
FAQ:1,Q1: Are you a manufacturing company?
A1: We are a manufacturer with over 29 years of experience.
2,Q2: Customized Product
A2: We offer OEM and custom design services.
3,Q3: Quality Guarantee
A3: Our products come with a limited warranty of 12 to 18 months
from the shipment date to the original purchaser. Hengtong will
replace or repair defective products free of charge. This warranty
does not apply to any units that have been modified, misused, or
neglected.
4,Q4: Shipment & Packing
A4: Products are generally shipped by international express
including UPS, FedEx, DHL and INT for freight prepaid. You can also
use your own shipment account for collection. Standard export
packing is included along with inspection certification.
5,Q5: Contact Us
A5: We have an active and experienced sales team available to
assist you with technical questions and business issues. Simply
leave us a message or click on our online service.
