YK-150-1800 2 Ply Corrugated Cardboard Production Line from YIKE
GROUP
| Specification | Equipment name | UNIT | QTY | Remark |
| ZJ-V5B | Hydraulic shaftless mill roll stand | a | 2 | The spindle￠240mm,hyperbola heavy rocker,toothed chuck,multi-disc
ventilated disc brakes,hydraulic drive lift,left and right
translation,for medium. Rail length 6000mm,trolley used 10mm plate welding. |
| Paper trolley | a | 4 |
| RG-1-900 | Preheater | a | 2 | Roller￠900mm,including certificate of pressure vessel.
Electromotion adjustment angle. |
| SF-320E | Cassette type single facer
B FLUTES | a | 1 | Corrugated roller ¢ 320mm, Tungsten carbide coating, electric
trailer 10-minute rapid change of tile roller, energy-efficient
synchronous belt rotation, maintenance-free airbag pressurization,
independent coating unit, PLC automatic control plastic,
man-machine interface touch screen, Paper automatic parking
pressure relief. |
| MK-320 | E FLUTES Corrugated Roll Quick Change Modules | a | 1 | Corrugated roller diameter:320mm,tungsten carbide dealing. Modules
section comprises. Both ends of the shaft seat,bearing,steam
element,suction box,pneumatic components assembly. |
| DY-C | Electric hydraulic quickly change trolley | a | 1 | Large capacity battery, power walking, hydraulic lift, centralized
control. |
| ZDF | Conveyor bridge | set | 1 | Independent frequency motor drive lifting, transmission. Main beam
is connected with the 20th channel, 16-beam, No. 63 angles,
columns, etc. Both sides of the security fence, the word pedals,
ladders. |
| DHE-150 | Single corrugated the aspect Cutter(Spiral knife cross cutting,
full servo longitudinal cutting, hanging basket stacking) | a | 1 | Full AC servo control spiral knife structure, touch screen display.
The take-up machine adopts graded and adjustable counting output
cardboard, and the maximum stacking length is 1.6 meters. Both the
paper pulling and paper feeding and the horizontal output motors
are frequency conversion speed regulation, full servo independent
motor, and the order change time is 1-3 seconds. |
Main technical parameters and requirements in production line
Type:YK-150-1800 single corrugated cardboard production line:
MAX. Produce width:1800mm Design speed:150m/min Economic
speed:90-120m/min
Note:Production line speed test paper should meet the following
requirements:(Equipment surface temperature not lower than 172 ℃
above)
﹡Paper grade of not less than B grade ﹡Paper moisture content of
about:11%±2%
﹡Facial tissue:100—250g/m2 ﹡core paper:100--180g/m2
- Flute-type combination:A ,C, B, E(Or a choice by the customer)
- Steam about500Kg/Hr, Maximum pressure:1.2Mpa, Common
pressure:0.8-1.1Mpa
- Power supply:380V 50Hz Three-phase four-wire system
- Equipment installed total power:about 90KW Actual electric
consumption:about30KW
- Equipment area:about 30m×11m×5m(Specific length of foundation
Figure prevail)
- Equipment out of paper orientation:according to user’s factory to
determine drive left or right
- Equipment applicability,Available in A, B, C class domestic or
imported paper Paper
Customer-owned section
1. Steam heating system:proposal with 1000Kg / Hr of a steam boiler
, Pressure:1.25Mpa steam pipeline.
- Air compressed machine,air pipeline,glue conveying pipe.
- Power supply,wires connected to the operation panel and line pipe.
- Water sources,water pipelines,buckets and so on.
- Water, electricity, gas flush mounting civil foundation.
- Test with the base paper,corn starch (potato), Industrial use
caustic soda,borax and other material.
- Oil equipment, lubricating oil, hydraulic oil, lubricating grease.
- Installation, commissioning of food, accommodation. And provide
installers with the installation.
※ZJ-V5B hydraulic shaftless mill roll stand
※Structural feature:
★Adopt hydraulic drive to complete the paper clamping, loosen,
remove for the medium, translation left and right and others,the
lifting of the paper adopts hydraulic drive.
★Brake adjustable adopts multi-point braking system.
★Every stand matched two sets paper car , and they can paper on the
both sides at the same time.
※Technical parameters:
1.The range of clamping paper:MAX1800mm MIN1000mm
2.Clamping diameters:MAX￠1500mm MIN￠350mm
3, Main shaft diameter of paper holder:￠242mm
4,Gas source work pressure(Mpa):0.4---0.8Mpa
5,Equipment size:Lmx4.3*Wmx1.8*Hmx1.6
6,Single weight:MAX4000Kg
※RG-1-900 preheater
※Structural features:
★Preheat roller accord the pressure container national
standards,and enclose the pressure container certificates and
inspection certificate.
★Each roller surface after grinding precision grinding and dealing
with hard chrome plating, Surface friction is small, durable.
★Electromotion adjustment angle, and angle can rotation adjustment
the preheat area in the range of 360°.
※Technical parameters:
1.Effective width:1800mm
2,Diameter of preheat roller:￠900mm
3,Angle adjustment range:360°rotation 4,Angle shaft
diameter:￠110mm×2
5,Steam temperature:150-180℃ 6,Steam pressure:0.8-1.3Mpa
7,Equipment size:Lmx3.3*Wmx1.1*Hmx1.3 8,Single weight:MAX2000Kg
9,Working power:380V 50Hz 10,Motor power:250W short(S2)working
system
※SF-320E multi-cassette positive pressure single facer
※structural features:
★main flute roller:￠320mm(according flute differ),pressure
roller￠370mm,preheat roller￠400mm.
★using negative pressure type design, low heat loss,helps the core
paper to press evenly and close to the surface of corrugated
roller, make the corrugate molding better, pressure uniform, the
top of corrugate can glue uniform and better, make the single
corrugated paper have perfect laminating.
★quickly change rollers in 10 minutes, while change corrugated
roller with the electric trolley loading,the entire group of
corrugating with motor drive,put into the machine,fixed to the
machine base,only need a few buttons can complete the replacement
quickly and easily.
★corrugated roll adopt 48CRMO high quality alloy steel,dealing with
heating, after grinding hard chrome plating surface treatment.
★corrugated roll and pressure roll adopt the airbag control system
with high stability, at the same time with pneumatic control buffer
effect.
★Glue volume control with electric adjustment,rubber septum
electric device,the glue system can operate independently when the
motor stops,prevent glue exhausted.
★the moveable type glue unit is convenient to clean and maintain.
★easy operation control system, touch screen operation
interface,Drawing with color display operating status, function
selection, fault indication, and parameter settings, etc. can
exclude exhibit this machine fully functional, easy to operate,
user-friendly.
★built-in pre-conditioner with proportional spraying device,
adjustment the core paper temperature and moisture.
★main, vice corrugating and pressure roller bearings are used in
high-temperature grease to ensure bearing life running smoothly.
※roller diameter parameters:
- diameter of up corrugated roller: ￠320mm
- diameter of pressure roller:￠269m
- diameter of glue roller:￠268mm
- diameter doctor roller :￠153mm
- diameter of preheater:￠400mm
※powered motor parameters:
1.main frequency drive motor:22KW rated voltage:380V 50Hz
Continuous (S1) working standard
2,suction motor: 11KW rated voltage: 380V 50Hz Continuous (S1)
working standard
3,glue reducer: 100W rated voltage: 380V 50Hz short(S2) working
standard
4,glue gap motor: 400W rated voltage: 380V 50Hz short(S2) working
standard
5,glue pump motor: 2.2KW rated voltage: 380V 50Hz Continuous (S1)
working standard
6,Coating Motor: 3.7KW rated voltage: 380V 50Hz Continuous (S1)
working standard
※ZDF conveyor bridge
※Structural feature:
★This part of the main frame with channel, beam, angle and so
connected together.
★Other sides are equipped with safety barriers and security
herringbone pedal operation face a safety ladder, ensure staff
safety and ease of operation.
★Independent variable frequency motor lifting mechanism, PVC
conveyor belt, a single watt of cardboard into a wavy rule stable.
★All roller surface after grinding hard chrome plated.
★Bridge over the auxiliary high-strength composite sheet, smooth,
durable, low friction, reducing transportation resistance
cardboard.
Machine shipping
More details if you need pls call us
wa.me/008613363699514
Anna
FAQ
1. who are we?
CHINA YIKE GROUP, Which based in Hebei, China, start from 2002,sell
to Mid East(24.00%),South America(21.00%),Eastern
Europe(15.00%),Africa(10.00%),Southeast Asia(10.00%),North
America(5.00%),Western Europe(2.00%),Southern Europe(2.00%),Eastern
Asia(10.00%). There are total about 5-10 people in our office.
2. how can we guarantee quality?
Firstly pre-production sample before mass production;
Secondly Inspection before shipment;
3.what can you buy from us?
Corrugated Cardboard Production Line,Carton Box Making machine, Box
Printing Forming Machine, Auto folder gluer, sitching machine, die
cutting machine, bundling machine..
4. why buy from us not from other suppliers?
Factory related carton machinery import & export company, based on
more than 30 years experience in providing complete and carton
machinery solutions according to different customer situations and
requriements. reliable quality and good service on site.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,DDP,DDU,Express
Delivery,DAF,DES;
Accepted Payment Currency:USD,EUR,JPY,CAD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit
Card,PayPal,Western Union,Cash;
Language
Spoken:English,Chinese,Spanish,Portuguese,Arabic,French,Russian,Italian
