Single Use IV Filter With Hydrophilic PES 5μm and Hydrophobic PTFE
0.2μm Non-sterile
The single in-line IV filter is designed foer use in filtration of
intravenous for removal of particles larger than 5μm from liquids
to ensure the purity and safety of a drug or biological sample.
It‘s function is to filter out those particles that may have a
negative impact on the final product, thus ensuring that the
resulting liquid medicine or biological sample is of high quality
and purity.
We XINNA 's single use IV filters are typically made of
high-quality materials : PES membrane for drug liquid and PTFE
membrane for air venting . These materials have good chemical
compatibility and can withstand the corrosion of various chemicals
and solvents. In addition, these materials also have high
temperature resistance properties, which can maintain stable
performance in high temperature environments.
Features :
- Easy to connect to IV tubing sets with standard luer inlet and
outlet slip
- Precision filtration of fine particles
- High retention efficiency
- Automatic air venting
- Automatic air-stop
- Reduce risk of phlebitis and infusion pain
Characteristics:
| Dimensions: | 57*29.5*0.94mm(inlet/outlet connector included) |
| Weight: | 5..7-5.8g |
| Filtration area: | 6.0CM2 |
| Venting area: | 0.54CM2 |
| Venting air flow rate: | 25ml/min@5kpa |
| Max burst pressure: | 360kpa(52.5psi) |
| Operating Temp: | 5-40℃ |
| Storage Temp: | 0-50℃ |
| Filtration rate: | PES-PP 5.0μm ≥95%, |
| PES-PP 3.0/2.0/1.2μm ≥90% |
| Min water flow rate: | PES-PP 1.2μm ≥500ml/10min@10kpa |
| PES-PP 2μm ≥600ml/10min@10kpa |
| PES-PP 3μm ≥800ml/10min@10kpa |
| PES-PP 5μm ≥1000ml/10min@10kpa |
| Sterilization: | Ethlene Oxide(Max 60℃) |
Applications:
- Medical infusion sets
- Biomedical and Pharmaceutical area
- Laboratory applications
Warnings:
Filter for medical use, assembled in clean room only. Remove the
external bag before planting into a clean room.
Handle with care. Keep filter in vertical position with flow arrow
on both sides and the printing mark before assembling.
Be careful on glueing, if Hydrophilic PES membrane contact with
glue, membrane will breaks down
Alcohol is not allowed to contact with housing, or it will damage
the ABS-based housing visible o invisible.It's not recommended to
use alcohol or any kind of disinfactant in direct contact with
venting membrane, PTFE membrane will become hydrophilic until
dried.
Test report, biological and undisclosed information, extra
requirment etc., please do not hesitate to contact us
Filters with 1.2μm filter media is not recommended for TPN and
lipids administration.
Rigorous testing is recommended before marketing if drugs is not
common.
Contact with Xinna-Medical for more information if any doubt is
exist advanced.
