Chamber Type Iec 60529 Ip Testing Equipment Waterproof

Chamber-Type IEC60529 waterproof IP Testing Equipment for IPX1/2, IPX3/4 and IPX5/6 Testing

1. Function of the Comprehensive Test Chamber

The chamber equipment integated with drip box for IPX1 and IPX2 testing, R600 oscillating tube for IPX3 and IPX4 testing, and jet hose nozzles for IPX5 and IPX6 Testing. The main function of this equipment is to test the physical and other related properties of electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts under simulated rainy climate conditions. After testing, verification is used to determine whether the performance of the product meets the requirements of IPX1, IPX2, IPX3, IPX4, IPX5 and IPX6K, so as to facilitate product design, improvement, verification and factory inspection.

2. Application

Outdoor lightings, householding appliance, auto parts and other electronics device.

3. Standard Conform to

IEC60529:1989 +A1:1999 +A2: 2013clauses 14.2.1 and 14.2.2, 14.2.3 and 14.2.4, 14.2.5 and 14.2.6.

1). For IPX1 and IPX2 tests, the aperture of nozzle is Φ0.4mm, distant of drip nozzle is 20mm. The IPX1 test requests the dripping water (vertically falling drops) shall have no harmful effect, test duration: 10 minutes, equivalent to 1 mm / minute. The IPX2 test requests vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position, test duration: 10 minutes (2.5min in each of 4 fixed positions of tilt), water equivalent to 3 mm/minute.

2). For IPX3 test, the oscillating tube has spray holes over an arc of 60⁰ either side of the centre point (the other holes are blocked), the total flow rate is adjusted as standard requirement, the enclosure to be tested is placed at the center point of the semicircle, the tube is caused to oscillate through an angle of 120⁰, 60⁰ on either side of the vertical, the time for one complete oscillation (2*120⁰) being about 4s and test duration being 5min.

For IPX4 test, the oscillating tube has spray holes over the whole 180’’ of the semicircle, the total flow rate is adjusted according to the standard requirement, and measured with a flowmeter. The tube is caused to oscillate through an angle of almost 360⁰, 180⁰ on either side of the vertical, and time for one complete oscillation (2*360⁰) being about 12s. The duration of the test is 10min.

3). IPX5 Water jets, Water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects. Test duration: at least 15 minutes, volume: 12.5 litres per minute, pressure 30 kPa at distance of 3 m.
For IPX6 Powerful water jets, Water projected in powerful jets (12.5 mm nozzle) against the enclosure from any direction shall have no harmful effects. Test duration: at least 3 minutes, volume: 100 litres per minute, pressure 100 kPa at distance of 3 m.100 to 150mm

4.Parameters

5. Product Show

Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,  glow wire test apparatus, needle flame tester, tracking index tester, iec61032 IP code probes, IEC60061-3 gauges for lamp caps and holders, UL498/VDE0620/BS1363-1 gauges for plug and socket, ground resistance tester, insulating resistance tester, hipot tester, temperature chamber, spring hammer,  tumbling barrel test equipment, test vessels, ESD gun, surge generator, goniophotometer, integrating sphere, spectroradiometer, power supply and etc. Besides, we can provide customized service.

Nowadays, we have several production lines in China, we imported advance technology and machines to make the gauges to keep high precision, and use the world famous-brand components to make the equipment more reliable. We promise the customers can get the high quality products during the shortest lead time, and we can provide the third-lab calibration certificates if customer request. The Pego’s products have been sold to the world wide, and widely used in labs, production line, QC and R&D departments with the features of high precision, simple operation, humanization design and good performance.

To Provide better user experience with better quality and better price is the motto of Pego. With the growth of test items, PEGO hope to grow with our users, and search for better test solution for our users.