Battery CB Certification;What is Battery CB Certification?

Introduction of battery CB certification
The CB system (IEC system for the qualification testing and certification of electrical products) is an international system operated by IECEE. The certification bodies of IECEE member states test the safety performance of electrical products based on the IEC standard. The test results are the CB test report and CB. The test certificate is mutually recognized in the IECEE member states. So far, 66 certification bodies in 51 countries and more than 270 CB laboratories under it have participated in this mutual responsibility system. The purpose is to reduce the barriers to international trade that arise from having to meet different national certification or approval criteria. IECEE is the abbreviation for International Electrotechnical Commission Conformity Testing and Certification Organization for Electrical Products.
After the company obtains the CB certificate from one of the certification bodies, due to the mutual recognition agreement, it can no longer perform repeated testing, and only perform report review and supplementary testing or national difference testing, and can be converted into the safety certification certificates of other member states.

Battery CB Certified Product Range
Portable sealed secondary battery cells and batteries (groups) containing alkaline or non-acid electrolyte
IEC62133 test standard:
Secondary cells and batteries (groups) containing alkaline or non-acid electrolytes: safety requirements for portable sealed secondary cells and batteries (groups) used in portable equipment.
Battery CB test project
1.Low rate charging
2.Vibration
3.Temperature cycle
4. External short
5. Free fall
6. Hot punch
7. Crush the battery (front side squeeze)
8. Low voltage test
9. Overcharge test
10. Over discharge test
11. High rate charging
CB certification process
1. Fill in the application form;
2. Provide product information;
3. Send samples;
4. Test OK and submit the report to the certification body (NCB);
5. The report will be reviewed and a CB certificate will be issued after it is qualified.
CB certification advantages
In the past, most electronic and electrical products had to meet different regulations when entering countries. To obtain product safety certification in each country was a difficult and time-consuming and costly process. But now relying on the CB system, manufacturers can obtain safety certifications in 54 countries at one time, and truly implement one test to meet multiple test needs.
Manufacturers that have obtained the CB certificate can greatly reduce costs, effort and time when applying for other certifications.
1. The company obtains the CB test report and can be easily converted into certification marks such as VDE, GS, GOST-R, SASO, and Australian RCM.
2.CB test report can be easily converted into China CCC certification or voluntary certification
3. Obtaining CB certification is conducive to being directly recognized by many countries, such as Southeast Asian countries and other recognized battery product CB certification inspection standards: IEC62133:
"Safety Requirements for Single Cells (Cells) and Battery Packs Containing Alkaline or Non-Acid Electrolyte, Portable Cells, Batteries Made with the Cells, and Portable Applications"

About Us

Shenzhen LCS Compliance Testing Laboratory Ltd., abbr. for LCS, was founded in 2004 in Shenzhen, LCS is now growing into an independent comprehensive third-party institution which focuses on test & certification. Profound technical background and diligent working attitude decided LCS with an outstanding high starting point from the outset，pioneering spirit and consciousness of keeping pace with the times which predestined the thoroughly tempered course of LCS.

Our Labs

LCS Founding Members have engineering background and had gradually built up Safety Lab, EMC Lab, RF Lab, SAR & HAC Lab, Reliability Lab, Lighting Electrical Lab, LED Lighting Performance Lab, Energy Efficiency Lab, Electronic Cigarette Testing Lab, Chemistry Lab, BQTF, Environmental and Occupational Evaluation Lab, Battery Lab, Toy Lab, Textile Lab, Food and Food Grade Material Lab. The establishment of our comprehensive labs ensure our test and certification scope covers almost all fields, such as Reliability and Safety test, EMC test, Chemical Hazardous Substances test, Material Analysis, Food Contact Material test, Bluetooth Test & Certification, Environment and Occupational Health, Performance test of spare parts of Automobile and so on.

Authorization

Moreover, LCS won many authorized qualifications both domestic and overseas. LCS is recognized as IEC/ISO17025 laboratories accepted by CNAS and NVLAP, accredited by CPSC, CMA, accredited for CQC, ISTA, CBTL, SASO, SABS. Meanwhile LCS become laboratory authorized by TUV, BQTF issued by the SIG. LCS had also signed cooperation agreements with FCC, ISED, ETL, CEC, UL, E-Mark, CETECOM, KTC, SAA Approval and many other authoritative institutions, hence we can provide our clients with efficient and professional service for product test and certification.

Experience

Our RF experience ranges from WLAN (802.11b/g/n/a/ac), Wi-Fi 6E, Bluetooth (802.15.1), ZigBee (802.15.4), Z-Wave, UWB (802.15.3), WiMAX (802.16), SRD, DECT, RFID, NFC, GSM, WCDMA (+HSDPA/HSUPA), LTE, 5G (NR/VoNR/eMTC/eMBB/URLLC),UHF/VHF, WHDI, AM, FM, DAB, DVB, GPS, GNSS, COMPASS, GLONASS and more. The products we are mostly working with are basestations, client adapters, laptops, cordless phones, baby monitors, cellulars, radars, sensors, scanners, receivers, immobilizers, remote controls, etc. Modern products incorporate not often one, but a variety of co-existing technologies.

Welcome

LCS is a reliable party. With more than 20 years hands-on experience in the field of Radio, Telecom, EMC and Safety certification, including country approvals worldwide, we will guide you with our knowledge. You are very welcome!

We will be pleased to assist you with your questions or inquiries, please contact us.