High Thrust 15mm M3 Screw Slider Stepper Motor Xy Axis With Bracket
15mm M3 lead screw slider stepper motor features:
This is a stepper motor with a moving slider with a bracket and
lead screw.
This motor slider is plastic, we also have metal sliders for
customers to choose.
Since the output shaft of the motor is a lead screw, during the
rotation of the lead screw, the lead screw will drive the slider to
move back and forth. This makes it easy to provide actions such as
forward and backward. In addition, the stepping motor can also
precisely control the speed, the number of revolutions, etc. It
also determines the moving speed of the slider and can precisely
control the moving position. The positioning accuracy can be
controlled within 0.05mm.
The motor characteristics described above are widely used in
various fields such as beauty equipment, medical equipment, vending
machines, and rapid testing.
Main Application
1) vending machine
2) Optical instruments
3) Precision medical devices
4) beauty equipment
Other precise control application
15mm M3 lead screw slider stepper motor Specifications:
| Model No. | SM15-80L |
| Motor type | Linear stepper motor |
| Phase No. | 2 phases |
| Step angle | 18 degrees |
| Phase resistance | 15±10% Ohm/phase |
| Excitation method | 1-2 Phases Excitation |
| Rated voltage | 5 - 12 V DC |
| Lead screw type | M3*0.5Pitch thread |
| Stroke | 80mm |
| Pull-out thrust | Over 500 gf at 700 PPS |
| Max response frequency | Over 1600 PPS |
| Max Starting frequency | Over 1100 PPS |
Drawing of 15mm plastic slider stepper motor with 80mm stroke:
Product display for 15mm plastic slider stepper motor:
Customers can customize content:
1. The outer diameter of the motor can be selected in different
sizes such as 6 8 10 15 20 25mm according to the customer's use
environment and space strength.
2. The position of the motor air outlet can be adjusted freely
within a range of 360 degrees to achieve the best state and meet
the installation requirements. At the same time, the connector can
also choose lead, PCB, FPC bare pins.
2. The effective stroke of the motor can be customized within a
certain range according to customer requirements, mainly
considering the diameter and length of the lead screw.
Usually the maximum length of M2 screws can reach 50mm, M3 screws
can reach 100mm, and M4 screws can reach 100mm. We can also do
150mm. The diameter of the lead screw used by the micro motor is
too large and the power consumption is also large, so the customer
should consider comprehensively when selecting the motor.
4. The material of the slider is generally plastic, which is easier
to form.
If the customer has special use environment and requirements, the
slider can also use metal parts.
Of course, the cost of metal will be higher, which needs to be
determined according to the customer's requirements for the shape
and size of the slider.
