18 degree step angle stepper motor 15mm micro stepper motor with
screw slider stepper motor
SM15-80L-S is a precision stepper motor with a 15mm plastic screw
slider. The distance between the output shaft and the guide screw
is 0.4mm.
The basic step angle of the motor is 18 degrees, and it runs 20
steps per week. The displacement resolution can reach 0.02mm,
achieving precise control.
The executing agency adopts a segmented driving method to meet the
requirements.
Exquisite design: This guide rail and linear block have a small
volume and light weight, making them particularly suitable for
small teams. This tool is easy to use, sturdy and durable.
Can be used for DIY small sliders/projects/equipment
measurements/laser printers.
It adopts advanced technology and fine craftsmanship, and is an
essential linear motion component.
Metal sliders can also be chosen instead of plastic sliders.
Mechanical Dimension:MM
Typical Applications
Specifications
| Product Name | 15mm micro stepper motor |
| Model | SM15-80L-S |
| Rated Voltage | 12V DC |
Coil Resistance | 15±10% ohm/PHASE(20℃)) |
No.Of Phases | 2 Phases |
Step Angle | 18°/Step |
Current Per Phase | 800mA/Phase |
Drive Mode | Bipolar Drive |
Pull-out-Thrust | More Than 230 g AT 125PPS |
Max Response Frequency | More Than 1300 PPS |
Max Starting Frequency | More Than 900 PPS |
Insulation Class | CLASS E FOR COILS |
Insulation Strength | 100V AC FOR ONE SECOND |
Insulation Resistance | 50mΩ(DC 500 V) |
Operating Temperature | -0~55℃ |
Motor surface temperature | 80℃ or less |
Competitive Advantage
- High quality and the best price.
- Fast deliver,storage company and rich inventory
- Near Shanghai port, the traffic is very convenient.
Type Of Wire Connect For Reference
Motor input method with Pin type, FPC, PCB, Lead wire etc.
These can be customized according to customer needs.
Type of Fixture Cover
The regular models are shown in the figure, and the special sizes
can be customized.
Product Detail Presentation
